PBDD-5026J Datasheet, PDF (1/1 Pages) Powerbox – 52-132 WATTS DC/DC SINGLE

PBDD Series
52-132 WATTS DC/DC SINGLE
Features
• High efficiency for mobile communication.
• Lifetime reliability.
• Easy installation, small foot print.
• Low cost.
• EMC compliant.
• Ideal for high vibration/impact services.
Specifications
INPUT
Input voltage
OUTPUT
Output voltage
Voltage adjustment
Output current
Output noise
No load current
Output & fault indications
Reverse input protection
Transients protection
Overcurrent protection
Overvoltage protection
Transient protection
Electrostatic protection
Duty cycle
OPERATING
Efficiency
ENVIRONMENTAL
Operating temperature
Cooling
Humidity
Environmental protection
15-38Vdc.
13.2Vdc
N/A
See table
CISPR25, <50mV p-p at full load.
<15mA.
Green & red LEDs.
Yes.
Yes.
Yes.
Yes.
ISO7637-2
ISO10605/14982. >8kV contact and 15kV
discharge
Peak load is available for a maximum of 5 minutes
in each 20 minutes.
>90%
-25°C to 30°C.
Above 30°C ambient, reduce continuous load by
2% per °C.
Convection cooled.
90% non condensing.
IP53 dust, water and impact resistance.
STANDARDS AND APPROVALS
EMC testing
AS/NZS2064, EN50081-2.
Compliance marking
C-tick, CE mark.
MECHANICALS
Case material
T6063 marine grade aluminium, anodised.
Colour
Blue.
End caps and brackets
Glass filled nylon 6.
Electrical construction
Electrical connection
Surface mount technology.
Recessed 6.3mm spade terminals. Insulated push
on connectors supplied.
Installation
Mounting bracket - supplied with screws
Dimensions
70x75x32mm (PBDD5026J).
80x75x32mm (PBDD5024M).
90x75x32mm (PBDD5027R).
Weight with bracket
159g (PBDD5026J), 198g (PBDD5026JM).
198g (PBDD5024M), 237g (PBDD5024JM).
212g (PBDD5027R), 251g (PBDD5027M).
MODEL
NUMBER
PBDD-5026J
PBDD-5024M
PBDD-5027R
OUTPUT
VNOM
13.2V
13.2V
13.2V
INOM
4.0A
7.0A
10.0A
IPEAK
7A
10A
14A
Accessory
Output
(13.2V,100mA)
YES-PBDD-5026JM
YES-PBDD-5024MM
YES-PBDD-5027RM
Your dependable power partner – www.powerbox.com.au
103