PBB2C Datasheet, PDF (1/4 Pages) Powerbox – 1 0 - 1 5 0 WAT T S - A C / D C S I N G L E O U T P U T

PBB2C Series
10-150 WATTS - AC/DC SINGLE OUTPUT
FEATURES
• Full range input voltage 85–264VAC
• Fully regulated output
• Short circuit overcurrent/overvoltage protection
• High quality
• OEM product
• UL, CSA and TÜV approvals
• C-Tick compliant
SPECIFICATIONS
INPUT
Voltage
Frequency
Safety isolation
Inrush current
OUTPUT
Output voltage
Output current
Regulation
Voltage adjustment
Ripple and noise p–p
Overvoltage protection
Overcurrent protection
Temperature drift
Efficiency
Hold up time
Rise time
85–264VAC or 110–370VDC (PBB2C-D
to L).110/240VAC autoranging (PBB2C-M
to R).
47Hz–440Hz.
In/Out 3000VAC, 1 min, 10mA, 500VDC,
50M ohm min.
In/Gnd 2000VAC, 1 min, 10mA, 500VDC,
50M ohm min.
Out/Gnd 500VAC, 1 min, 100mA, 500VDC,
50M ohm min
30A typical at 200V AC.
See table.
See table.
Line: 0.4% max.
Load: 0.8% max.
Main output ±10%.
See table.
At 115%–140% of rated.
At 105% of rated.
1% typical. 0°C to 50°C.
See table.
10mS typical at 85VAC input
200mS max.
ENVIRONMENTAL
Operating temperature
Derating
Cooling
Vibration
Impact
STANDARDS
Safety standards
C-tick
EMI standards
MECHANICAL
Case size
Cable harness
-10°C to 60°C.
50°C to 60°C Forced Air.
50°C to 70°C Forced Air.
Convection.
10Hz–55Hz, 2G, 3 mins period for 60
minutes each along X, Y and Z axis.
20G, 11mS, once each along X, Y and Z axis.
UL60950-1, EN60950-1, CSA C22.2 No.234,
EN50178, IEC60950-1
AS/NZS CISPR11 Group 1 Class A.
FCC-B, CISPR22-B, EN55022-B, VCCI-B
PBB2C-D-SNY 57x32x125mm
PBB2C-F-SNY 57x32x145mm
PBB2C-H-SNY 65x36x163mm
PBB2C-J-SNY 65x36x225mm
PBB2C-L-SNY 65x42x252mm
PBB2C-M-SNY 72x45x252mm
PBB2C-R-SNY 85x47x252mm
Input/output harness supplied with PSU
Doc. No. PBC9 Rev.C 28-4-11
Powering Progress – www.powerbox.com.au
31