PBB1P Datasheet, PDF (1/2 Pages) Powerbox – A C / D C D I N R A I L WI T H I E C I N P U T

PBB1P-Series
AC/DC DIN RAIL WITH IEC INPUT
FEATURES
• 100W - 120W
• DIN Rail Mountable
• IEC AC Input connector
• Corrosion resistant aluminum chassis
• Optional Condensation drip hood cover
• Conformal coating coating on PCB assembly
• Protected against common dust and chemical pollutants
• Operating Temperature -25°C to 80°C
• High Efficiency > 90%
• 150% Power Boost
• MTBF > 500 000hrs
SPECIFICATIONS
INPUT
Input Voltage Range
Input Frequency
Input Current
Efficiency
Leakage Current
OUTPUT
Output Voltage
Output Voltage Range
Output Current
Output Power
Indicator
Line Regulation
Load Regulation
PARD (20MHz)
Hold-up Time
PROTECTIONS
Overvoltage
Overload/Overcurrent
Over Temperature
Short Circuit
Degree of Protection
Protection against shock
Galvanic Isolation
RELIABILITY
MTBF
Expected Life Time
85-264Vac (DC input range 120-375Vdc)
47-63Hz
< 1.10A @ 230Vac
> 90.0% @ 230Vac @ 100% load
< 1mA @ 240Vac
24Vdc, 48Vdc
24V - 28Vdc, 48V-56Vdc
See Selection Table
See Selection Table
Green LED (DC OK)
< 0.5% typ. @ 100% load
< 1% typ. @ 0-100% load
< 200mVpp
> 20ms
32V, +/-10% SELV Ouput, Hiccup Mode, Non-
Latching (Auto-Recovery)
> 150% of rated load current, Hiccup Mode,
Non-Latching (Auto-Recovery)
< 80°C Surrounding Air Temperature @ 100%
load, Non-Latching (Auto Recovery)
Hiccup Mode, Non-Latching (Auto-Recovery)
when the fault is removed)
IP20
Class 1 with PE (Primary Earth) connection
Input to Output: 4.0KVAC
Input to Ground: 1.5KVAC
Output to Ground: 1.5KVAC
> 500,000 hrs as per Telcordia SR-332 I/P:
115Vac, O/P: 100% load, Ta 25°C
10 years (230Vac 50% load @ 40°C)
ENVIRONMENTAL
Operating Temperature
-25°C to +80°C
Storage Temperature
-25°C to +85°C
Power De-rating
> 50°C (2.5% / °C)
Cooling System
Convection
Operating Humidity
< 95% RH (Non-Condensing)
Operating Altitude
0 to 2,500m
MECHANICAL
Case Cover
Aluminium
Dimensions (L x W x D)
121 x 50 x 123.1 mm
Unit Weight
0.72 kg
Mounting Rail
Standard TS35 DIN Rail in accordance with
EN60715
Input Connector
Output Connector
Mounting L Bracket
Driphood Cover
STANDARDS
IEC Socket (with 2M IEC power cable)
12V: M4 x 2 Pins
(Rated 300V/20A)
24V, 48V: Pluggable Connector 4 Pins
(Rated 300V/15A)
Output Wire: AWG20-12
Optional Mounting Bracket Available
See technical illustrations
Optional Condensation Driphood Cover Available
Attached Above Power Supply Unit
C-Tick
AS/NZS CISPR11 Group 1 Class A.
Electronic Equipment
EN50718 / IEC62103, In Power Installations
Electrical Safety
SIQ to EN60950-1, UL/cUL recognized to
UL60950-1, CSA C22.2 No. 60950-1, CB scheme
to IEC60950-1
UL/cUL listed to UL508 and CSA C22.2 No.
Industrial Control Equipment 107.1-01, CSA to CSA C22.2 No. 107.1-01 (File
No. 181564)
In conformance with EMC Directive
CE
2004/108/EC and Low Voltage Directive
2006/95/EC
Materials & Parts
RoHS Directive 2011/65/EU Compliant
Doc. No. PBB1P Rev.F 2-11-15