|
LOPAC Datasheet, PDF (1/2 Pages) Vicor Corporation – PFC Mini, PFC Micro, PFC MicroS Power Factor Corrected, AC-DC Switchers | |||
|
LoPAC Series
500-1500 WATTS - AC/DC LOW PROFILE SINGLE & MULTIPLE OUTPUT
FEATURES
⢠Near unity power factor
⢠EN61000-3-2 harmonic current compliance
⢠Low profile package
⢠Output power to 1,500W
⢠Up to 6 user specifiable outputs
⢠Universal AC input
⢠Power density up to 11W/in3
⢠New âAutosenseâ feature
⢠Safety agency approvals: CE Marked,
cTÃVus (pending), cULus, TÃV
INPUT
Voltage
Frequency
Line regulation
Inrush current
@ 115Vac
@230Vac
Isolation
Power factor
OUTPUT
Setpoint accuracy
Load regulation
Temp. regulation
Long term drift
Ripple & noise
Voltage trim range
Remote sense
Compensation
OVP set point
Current limit
85-264Vac,
100-380Vdc (PFC Mini),
100-300Vdc (PFC Micro, PFC MicroS)
47-500Hz.
0.4% (from low line to high line).
8.5Apk (PFC Mini),
7Apk (PFC Micro, PFC MicroS)
17Apk (PFC Mini)
14Apk (PFC Micro, PFC MicroS)
Input â Output: 4242Vdc
Input â Ground: 2121Vdc
Output â Ground: 750Vdc
> 0.98
1% of Vnom.
0.05% @ 10% load to full load.
0.2% @ no load to full load.
0.005%/°C, -20 to +65°C
0.02%/khr
<=10Vout, 100mV
>10Vout, 1.0% Vout
1st Gen slots
50-110% Vout
2nd Gen slots
10-110% Vout
(+/-10% on 10-15Vout, preload may be
required).
0.5Vdc
125% Vout. (not available in 1st Gen minis).
115% Imax. (with auto recovery).
ENVIRONMENTAL
Storage temperature
Operating temperature
STANDARDS
Safety standards
Surge
Harmonic current limits
C-Tick
EMI standards
EMC standards
MECHANICAL
Dimensions (LxWxH)
-40°C to +85°C
-20°C to +45°C (full rated power)
-20°C to +65°C (50% rated power).
CE Marked, cTÃVus
EN61000-4-5.
EN61000-3-2/A14
AS/NZS CISPR11 Group 1, Class A
FCC Class A, EN55022 Class A. (Certain
configurations meet FCC & EN Class B
EN61000-4-4 Level 3, Performance
Criteria B.
PFC Mini â 309.9x152.4x44.5mm
PFC.Micro â 264.1x128.5x47.3mm
PFC MicroS â 201.9x128.5x47.3mm
74
Doc. No. PBC9 Rev.C 28-4-11
|
▷ |