DRC Datasheet, PDF (1/3 Pages) Powerbox – Double Isolation (No earth connection required)

DRC Series
10-100 WATTS AC/DC DIN RAIL
FEATURES
• 10W - 100W
• DIN rail mountable
• Protection Class II
• Double Isolation (No earth connection required)
• Universal AC input voltage and full power up to 55°C
• Efficiency > 89.0% 230VAC
• NEC Class 2/Limited Power Source (LPS) certified
• Overvoltage/Overcurrent/Over Temperature Protections
• International safety approvals to ITE and Industrial standard
SPECIFICATIONS
OUTPUT
Output Voltage
Voltage Range
Output Current
5V, 12V, 24V
5Vdc, 4.75V - 5.25Vdc
12Vdc, 11.5V - 14.5Vdc
24Vdc, 20V - 24.8Vdc
See Selection Table
Output Power
10W, 30W, 60W, 100W
Line Regulation
< 1% typ. (@ 90-264 Vac,100% load)
Load Regulation
< 2% typ. (@ 90-264 Vac,100% load)
PARD (20MHz)
< 150mVpp
Rise Time
< 100ms @ nominal input (100% load)
Start-up Time
< 3,000ms @ nominal input (100% load)
Hold-up Time
>30ms @ 230Vac (100% load)
Dynamic Response
± 5% @ 10 - 100% load
Start-up
3,000µF Max with Capacitive Loads
INPUT
Input Voltage
90-264Vac
Input Frequency
47-63Hz
Efficiency
> 82% @ 230Vac at 100% load
Input Current
DRC 10W: < 0.2A @230Vac
DRC 30W: < 0.60A @230Vac
DRC 60W: < 0.80A @230Vac
DRC 100W: < 1.0A @ 230Vac
Leakage Current
< 0.25mA @ 240Vac
PROTECTIONS
Overvoltage
17.4V & 34.8V+10% SELV Ouput,Latch-off Mode
Overload/Overcurrent
> 130% of rated load current, Hiccup Mode, Non-
Latching (Auto-Recovery)
Over Temperature
> 75C Surrounding Air Temperature @ 100% load,
Latch-off Mode
Short Circuit
Hiccup Mode, Non-Latching (Auto-Recovery) when
the fault is removed)
Degree of Protection IP20
Protection against Shock Class 1 with Primary Earth connection
Galvanic Isolation
3.0KVac
MTBF
> 500,000 hrs as per Telcordia SR-332
MECHANICAL
Case Cover
Dimensions / Weight
Indicator
Cooling System
Input Terminal
Output Terminal
Input / Output Wire
Plastic
DRC 10W: 91 x 18 x 55.6mm, 0.065kg
DRC 30W: 91 x 53 x 55.6mm, 0.14kg
DRC 60W: 91 x 71 x 55.6mm, 0.24kg
DRC 100W: 91 x 89.9 x 55.6mm, 0.35kg
Green LED (DC OK)
Convection
2 Pins Rated 300V/25A (DRC10W 16A)
4 Pins Rated 300V/25A (DRC10W 16A)
DRC 10W: AWG 26-12
DRC 30W: AWG 24-12
DRC 60W: AWG 26-12
DRC 100W: AWG 22-12, AWG 24-12
Mounting Rail
TS35 DIN Rail in accordance with EN 60715
STANDARDS AND APPROVALS
C-Tick
AS/NZS CISPR11 Group 1 Class A.
Safety
TUV Bauart to EN60950-1, UL/cUL recognized to
UL60950-1, CSA C22.2 No. 60950-1, CB scheme
to IEC 60950 - 1, Limited Power Source (LPS)
Industrial Control
CE
UL/cUL listed to UL508 and CSA C22.2 No. 107.1-
01
In conformance with EMC Directive 2004/108/EC
and Low Voltage Directive 2006/95/EC
Materials and Parts
EMC
RoHS Directive 2011/65/EU Compliant
CISPR 22, EN55022, FCC Title 47: Class A* IEC
61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC
61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC
61000-4-11, IEC 61000-4-12
Doc. No. DRC Series Rev.C 15-9-15