4000 Datasheet, PDF (1/1 Pages) C&D Technologies – Toroidal Surface Mount Inductors

4000 Series
10W-33KV SINGLE OUTPUT DC/DC INDUSTRIAL
Features
• 0 to 100% adjustability.
• Voltage programmable.
• Voltage monitor.
• Remote on/off control.
• EMI/RFI shielding.
• Short circuit, reverse polarity protection.
• Arc protection.
Specifications
INPUT
Voltage
OUTPUT
Power
Voltage
Current
Ripple
Analog control
Voltage monitor
On/Off control
Reference output
ENVIRONMENTAL
Operating temperature
GENERAL
Dimensions
Weight
Packaging
Case material
Input connector
Molex pins
High voltage leads
OPTIONS
Negative output voltage
+24Vdc (+20% to -5%).
10W.
See table.
See table.
See table.
0 to 10 Volts = 0 to 100% output.
0 to 10 Volts = 0 to 100% output..
On = 0 Volts or N.C.
Off = 5 Volts
10 Volts (±0.5%).
–10°C to +60°C.
104 x 78.7 x 35.56 mm (4010 to 4200).
104 x 91.4 x 35.56 mm (4300 to 4330).
675g.
Fully encapsulated.
Black anodised aluminum.
Molex 09-50-3071 (supplied).
08-50-0106 (supplied).
30KV 22AWG (4010 to 4200).
40KV 20AWG (4300 to 4330).
Put “N” after model (eg 4300N).
Selection Tables
MODEL
NUMBER
OUTPUT
VOLTAGE
OUTPUT*1
CURRENT
4010
0 to 1,000V
10mA
4020
0 to 2,000V
5mA
4030
0 to 3,000V
3.3mA
4050
0 to 5,000V
2mA
4070
0 to 7,000V
1.4mA
4100
0 to 10,000V
1mA
4120
0 to 12,000V
0.8mA
4150
0 to 15,000V
0.67mA
4200
0 to 20,000V
0.5mA
4300*²
0 to 30,000V
0.33mA
4330*²
0 to 33,000V
0.30mA
Note: 1. At maximum rated output voltage.
2. No voltage monitor.
RIPPLE
0.1%
0.1%
0.2%
0.1%
0.1%
0.1%
0.1%
0.1%
0.2%
0.4%
0.2%
PIN#
1
2
3
4
5
6
7
FUNCTION
On/Off control
Ground/case
+24Volt input
10 Volt reference output
Programming voltage
Internal potentiometer
Voltage monitor
PROGRAMMING
VOLTAGE
Apply 0-10V to pin 5 for 0-100% output.
RESISTANCE
Connect potentiometer to pin 4 (reference voltage),
connect wiper arm to pin 5, and connect
potentiometer to the ground.
MANUAL
Connect pin 6 to pin 5, turn front panel pot for voltage
adjust.
222