LP6302 Datasheet, PDF (1/7 Pages) Lowpower Semiconductor inc – Output Voltage Range: 0.6V to VIN

Preliminary Datasheet
LP6302
1.5MHz, 1.5A Step-down Converter With Soft-Start
General Description
The LP6302 contains two independent 1.5MHz constant
frequency, current mode, PWM step-down converters.
The converter integrates a main switch and a
synchronous rectifier for high efficiency without an
external Schottky diode. The LP6302 is ideal for
powering portable equipment that runs from a single cell
Lithium-Ion (Li+) battery. The converter can supply
1200mA of load current from a 2.5V to 5.5V input
voltage. The output voltage can be regulated as low as
0.6V. The LP6302 can also run at 100% duty cycle for
low dropout applications.
The LP6302 is available in a 16-lead 3mm*3mm TDFN
package and is rated over the -40°C to 85°C temperature
range.
Order Information
LP6302 - □ □ □ □
F: Pb-Free
Package Type
QV: TDFN-12
Type: Vout1/Vout2
B: 1.8V/1.2V
C: 3.3V/1.2V
D: 3.3V/1.8V
A: Adjustable
Features
— Input Voltage Range: 2.5V to 5.5V
— Output Voltage Range: 0.6V to VIN
— 1200mA Load Current on Each Channel
— Up to 95% Efficiency
— 100% Duty Cycle in Dropout
— < 1 u A Quiescent Current
— 1.5MHz Switching Frequency
— Soft star Function
— Short Circuit Protection
— Current Mode Operation
— Thermal Fault Protection
— 3 m m × 3 m m TDFN-12 Package
— RoHS Compliant and 100% Lead (Pb)-Free
Typical Application Circuit
Applications
— Portable Media Players
— Cellular and Smart mobile phone
— PDA/DSC
— GPS Applications
Marking Information
Please see website.
LP6302 – Ver. 1.0 Datasheet Sep.-2007