LP3984 Datasheet, PDF (1/8 Pages) National Semiconductor (TI) – Micropower, 150mA Ultra Low-Dropout CMOS Voltage Regulator in Subminiature 4-I/O micro SMD Package

Preliminary Datasheet
LP3984
300mA,Ultra-low noise, Small Package
Ultra-Fast CMOS LDO Regulator
General Description
The LP3984 is designed for portable RF and
wireless applications with demanding performance
and space requirements. The LP3984 performance
is optimized for battery-powered systems to deliver
ultra low noise and low quiescent current. A noise
bypass pin is available for further reduction of
output noise. Regulator ground current increases
only slightly in dropout, further prolonging the
battery life. The LP3984 also works with low-ESR
ceramic capacitors, reducing the amount of board
space necessary for power applications, critical in
hand-held wireless devices. The LP3984 consumes
less than 0.01µA in shutdown mode and has fast
turn-on time less than 50µs. The other features
include ultra low dropout voltage, high output
accuracy, current limiting protection, and high
ripple rejection ratio. Available in the 5-lead of
SOT23-5 packages.
Ordering Information
LP3984 - □ □ □ □ □
F: Pb-Free
Package Type
B5: SOT23-5
Output Voltage Type
12: 1.2V
15: 1.5V
18: 1.8V
25: 2.5V
28: 2.8V
2H: 2.85V
30: 3.0V
33: 3.3V
Typical Application Circuit
Features
Ultra-Low-Noise for RF Application 　
2V- 6.5V Input Voltage Range
Low Dropout : 220mV @ 300mA 　
1.2V, 1.5V, 1.8V, 2.5V, 2.8V 3.0V and 3.3V Fixed
300mA Output Current, 550mA Peak Current
High PSSR:-73dB at 1KHz 
< 0.01uA Standby Current When Shutdown
Available in SOT23-5 Package 　
TTL-Logic-Controlled Shutdown Input 　
Ultra-Fast Response in Line/Load transient 　
Current Limiting and Thermal Shutdown
Protection
Quick start-up (typically 50uS)
Applications
Portable Media Players/MP3 players
Cellular and Smart mobile phone
LCD
DSC Sensor
Wireless Card
Pin Configurations
SOT23-5(Top View)
Marking Information
Please see website.
LP3984 – 01 Ver. 1.1 Datasheet Jul.-2008
Page 1 of 8