LP3809 Datasheet, PDF (1/6 Pages) Lowpower Semiconductor inc – Micro-Power Voltage Detectors, Reset Of MCU With Delay Time

LP3809
Micro-Power Voltage Detectors,
Reset Of MCU With Delay Time
General Description
The LP3809 is a micro-power voltage
detector supervising the power supply
voltage level for microprocessors (µP) or
digital systems. It provides internally fixed
threshold levels with 0.1V per step ranging
from 1.2V to 5V, which covers most digital
applications. It features low supply current of
3µA. The LP3809 performs supervisory
function by sending out a reset signal
whenever the VDD voltage falls below a
preset threshold level. This reset signal will
last the whole period before VDD recovering.
Once VDD recovered upcrossing the
threshold level, the reset signal will be
released after a certain delay time. Available
in the 5-lead of SOT-23 packages.
Pin Configurations
Pin No.
Type A
Type B
SOT-23
1
RESET
GND
2
GND
RESET
3
VDD
VDD
Typical Application Circuit
Features
Built-in Recovery Delay Include 210ms
Internally Fixed Threshold 1.2V to 5V in
0.1V Step
No External Components Required
High Accuracy 1.5%
Low Supply Current 3 A
Low Functional Supply Voltage 0.9V
N-Channel Open-Drain output
Quick Start-Up
Applications
Computers
CPU/MCU/DSP
Portable
Battery-Powered Equipment
Ordering Information
LP3809□ - □ □ □ □ □
Type
A: Type A
B: Type B
F:PB-Free
Package
B3: SOT-23
Output Voltage:
12: 1.2V
13: 1.3V
50: 5.5V
Note:
1. Output Voltage range from 1.2V to 5.0V in
0.1V increments.
2. 2.7V output order is LP3809A-27B3F.
LP3809-datasheet Oct.-2004
1-1