LP3203 Datasheet, PDF (1/10 Pages) Lowpower Semiconductor inc – 1.5MHZ,600mA,High Efficiency Synchronous PWM Step-Down DC/DC Convert

Preliminary Datasheet
LP3203
1.5MHZ,600mA,High Efficiency Synchronous
PWM Step-Down DC/DC Convert
General Description
The LP3203 is a constant frequency, current mode,
PWM step-down converter. The device integrates a
main switch and a synchronous rectifier for high
efficiency. The 2.1V to 5.5V input voltage range makes
the LP3203 is ideally suited for portable electronic
devices that are powered from 1-cell Li-ion battery or
from other power sources within the range such as
cellular phones, PDAs and handy-terminals. Internal
synchronous rectifier with low RDS(ON) dramatically
reduces conduction loss at PWM mode. The internal
synchronous switch increases efficiency while
eliminate the need for an external Schottky diode.The
switching ripple is easily smoothed-out by small
package filtering elements due to a fixed operation
frequency of 1.5MHz. This along with small
TSOT-23-5 package provide small PCB area
application. Other features include soft start, lower
internal reference voltage with 2% accuracy, over
temperature protection, and over current protection。
Ordering Information
LP3203 - □ □ □ □ □
Features
◆ High Efficiency: 93% 　
◆ 1.5MHz Fixed-Frequency PWM Operation
◆ Adjustable Output From 0.6V to VIN 　
◆ 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V Fixed
◆ 600mA Output Current, 1.1A Peak Current
◆ No Schottky Diode Required
◆ 100% Duty Cycle Low Dropout Operation
◆ Available in TSOT23-5 Package 　
◆ Short Circuit and Thermal Protection 　
◆ Over Voltage Protection 　
◆ Low than 1µA Shutdown Current
Applications
Portable Media Players/MP3 players
Cellular and Smart mobile phone
PDA
DSC
Wireless Card
Pin Configurations
F: Pb-Free
Package Type
J5: TSOT23-5
Output Voltage Type
A: Adjustable type
12: 1.2V
15: 1.5V
18: 1.8V
25: 2.5V
33: 3.3V
LP3203 – Ver. 1.0 Datasheet Dec.-2006
Marking Information
Please see website.
Page 1 of 10