|
LP28400 Datasheet, PDF (1/17 Pages) Lowpower Semiconductor inc – Programmable Charge Current Up to 3000mA | |||
|
Preliminary Datasheet
LP28400
3A/15V Synchronous Switching Mode 1/2cell Li-ion
Chargers With Power Path Selector
General Description
The LP28400 is a complete constant-current/
constant- voltage Switch mode charger for 1cell or
2cell lithium-ion batteries. 1.5MHz Synchronous
Switching Charger with 3A Integrated MOSFETs. No
external blocking diodes is required. The Switch
mode charger uses a high switching frequency to
reduce power dissipation during charging eliminate
heat and allow tiny external components. It can
operate from a single input that accepts. All power
switches for charging and switching the load
between battery and external power are included
on-chip that can be embedded in a wide range of
handheld applications, Built-in power path controller,
easily installation with external MOSFETs, Dynamic
power management, better thermal performance.
The LP28400 includes complete charge termination
circuitry, automatic recharge and a ±1% output
voltage. Fault condition protection includes cycle -by
-cycle current limiting and thermal shutdown. Other
safety features include battery temperature
monitoring, charge status indication and
programmable timer to cease the charging cycle.
The LP28400 is available in a low profile (0.75mm)
10-lead (4mm à 4mm) TDFN package.
Order Information
LP28400 â¡ â¡ â¡ â¡ â¡
F: Pb-Free
Package Type
QV: TQFN-20
Output voltage
Default: 4.2V/8.4V
Features
ïµ Up to 95% efficiency
ïµ 4.5-15V Operating voltage(Vin)
ïµ Vin Over Voltage Protection:6.8V/16.5V
ïµ Short-circuit protection
ïµ Programmable Charge Current Up to 3000mA
ïµ Constant-Current/Constant-Voltage Operation
with Thermal Regulation to Maximize Charge
Rate Without Risk of Overheating
ïµ Charges 1Cell and 2cell Li-Ion Batteries Directly
with same chip, Chargers with power path
selector
ïµ Internal Fixed 7Hrs timer
ïµ Drainage Charge Current Thermal Regulation
Status Outputs for LED or System Interface
ïµ Indicates Charge and Fault Conditions
ïµ Optional Battery Temperature Monitoring Before
and During Charge Automatic Sleep Mode for
Low-Power
ïµ Consumption Available in 4mm à 4mm TQFN-20
Package
ïµ RoHS Compliant and 100% Lead (Pb)-Free
Marking Information
Device Marking
LP28400 LPS
LP28400
XXXXX
X: Batch numbers.
Package
QV: TQFN-20
Shipping
Applications
ï² Portable Media Players
ï² Cellular and Smart mobile phone
ï² Car GPS
ï² Handheld Battery-Powered Devices
ï² Handheld Computers
ï² Charging Docks and Cradles
LP28400-00 Version 1.0 May.-2013 Email: marketing@lowpowersemi.com www.lowpowersemi.com Page 1 of 17
|
▷ |