LP2203 Datasheet, PDF (1/8 Pages) CIT Relay & Switch – CIT SWITCH

Preliminary Datasheet
LP2203
200mA,Dual Channel Ultra-Fast CMOS LDO Regulator
General Description
The LP2203 is a dual channel, low noise, and low
dropout regulator sourcing up to 250mA at each
channel. The range of output voltage is from 1.2V to
3.6V by operating from 2.5V to 5.5V input.
LP2203 offers 2% accuracy, extremely low dropout
voltage (80mV @ 150mA), and extremely low ground
current, only 25µA per LDO. The shutdown current is
near zero current which is suitable for battery-power
devices. Other features include current limiting, over
temperature, output short circuit protection.
LP2203 can operate stably with very small ceramic
output capacitors, reducing required board space and
component cost. LP2203 is available in fixed output
voltages in the USP-6 package.
Ordering Information
LP2203 - □ □ □ □ □
F: Pb-Free
Package Type
U6: USP-6
Out1/Out2 Voltage Type
18/28: 1.8V/2.8V
18/33: 1.8V/3.3V
18/26: 1.8V/2.6V
25/28: 2.5V/2.8V
28/28: 2.8V/2.8V
28/12: 2.8V/1.2V
28/33: 2.8V/3.3V
30/30: 3.0V/3.0V
30/33: 3.0V/3.3V
33/33: 3.3V/3.3V
Typical Application Circuit
VIN
LP2203
Vout2
2 _Vin
VOUT2 ⁶
ON/OFF
1 _EN2
3
EN1
5
VOUT1
Vout1
Features
Wide Operating Voltage Ranges : 2.5V to 5.5V 
Low-Noise for RF Application
High PSRR 65dB at 1kHz
No Noise Bypass Capacitor Required 
Fast Response in Line/Load Transient
TTL-Logic-Controlled Shutdown Input
Dual LDO Outputs (200mA/200mA)
High Output Accuracy 2%
Ultra-low Quiescent Current 27uA
Thermal Shutdown Protection
Tiny USP-6 Package
RoHS Compliant and 100% Lead (Pb)-Free
Applications
CDMA/GSM Cellular Handsets
Smart mobile phone
Battery-Powered Equipment
DSC Sensor
Wireless Card
Pin Configurations
USP-6(Top View)
Marking Information
Please see website.
LP2203 – 01 Ver. 1.1 Datasheet Feb.-2008
Page 1 of 8