LP2202 Datasheet, PDF (1/8 Pages) CIT Relay & Switch – CIT SWITCH

Preliminary Datasheet
LP2202
250mA,Dual Channel Ultra-Fast CMOS LDO Regulator
General Description
The LP2202 is a dual channel, low noise, and low
dropout regulator sourcing up to 250mA at each
channel. The range of output voltage is from 1.2V to
3.6V by operating from 2.5V to 5.5V input.
LP2202 offers 2% accuracy, extremely low dropout
voltage (220mV @ 250mA), and extremely low
ground current, only 25µA per LDO. The shutdown
current is near zero current which is suitable for
battery-power devices. Other features include current
limiting, over temperature, output short circuit
protection.
LP2202 is short circuit thermal folded back protected.
LP2202 lowers its OTP trip point from 165°C to
110°C when output short circuit occurs (VOUT <
0.4V) providing maximum safety to end users.
LP2202 can operate stably with very small ceramic
output capacitors, reducing required board space and
component cost. LP2202 is available in fixed output
voltages in the SOT-23-6 package.
Ordering Information
LP2202 - □ □ □ □ □
F: Pb-Free
Package Type
B6: SOT23-6
Out1/Out2 Voltage Type
18/28: 1.8V/2.8V
25/28: 2.5V/2.8V
28/28: 2.8V/2.8V
Typical Application Circuit
VIN
5
1uF
4
Chip Enable
3
LP2202
Vin
Vout2
EN1
EN2
Vout1
GND
VOUT2
1
1uF
6
VOUT1
1uF
2
Features
Wide Operating Voltage Ranges : 2.5V to 5.5V 
Low-Noise for RF Application
High PSRR 70dB at 1kHz
No Noise Bypass Capacitor Required 
Fast Response in Line/Load Transient
TTL-Logic-Controlled Shutdown Input
Dual LDO Outputs (300mA/300mA)
High Output Accuracy 2%
Ultra-low Quiescent Current 27uA
Thermal Shutdown Protection
Thermal Shutdown Protection
Tiny SOT-23-6 and 8-Lead DFN Package
RoHS Compliant and 100% Lead (Pb)-Free
Applications
CDMA/GSM Cellular Handsets
Smart mobile phone
Battery-Powered Equipment
DSC Sensor
Wireless Card
Pin Configurations
SOT23-6 (Top View)
Marking Information
Please see website.
LP2202 – Ver. 1.0 Datasheet Dec.-2006
Page 1 of 8