PS-DA0290-324-B Datasheet, PDF (2/2 Pages) Power Systems GmbH+Co.KG – DC-AC INVERTER UNIT 6,5W DUAL OUTPUTS WITH DIMMING FUNCTION

DC-AC INVERTER UNIT
PS-DA0290-324-B(S) (6,5W DUAL OUTPUTS WITH DIMMING FUNCTION) (PRELIMINARY INFORMATION)
Input side CN1:
Pin No.
CN 1-1+2
CN 1-3+4
Symbols
Vin
GND
CN 1-5
Vrm t
CN 1-6
CN 1-7
CN 1-8
Vbr1 / Rbr1
Vbr2 / Rbr2
N.C.
Ratings
10.8 ~ 13.2 Vdc
-
0 ~ 0.4 = OFF
/ 2.5 ~ Vin = ON
0~2.5 Vdc / 0~10 kΩ
GND / 0~10 kΩ
(Vst 0 Vdc / 5 Vdc)
Output side CN2
Pin No. Symbols
CN 2-1 Vhigh
CN 2-2 Vhigh
CN 2-3
N.C.
CN 2-4
Vlow
Ratings
370 Vrms (5.0 mArms)
370 Vrms (5.0 mArms)
-
(GND)
Vst: This is an output pin and it is active high (+5V) if any lamp opens/fails.
ELECTRICAL CHARACTERISTICS :
Parameters
Conditions
Specification
Symbols
Unit
Vin (V) Vbr (V) Tu (°C) Min. Typ. Max.
Note
Output Current
Output Current
Input Current
Frequency
Open Circuit Voltage
No Load Shutdown
Iout
Iout
Iin
F
Vopen
Ts d
10,8 ~ 13,2
10,8 ~ 13,2
10,8 ~ 13,2
10,8 ~ 13,2
10,8 ~ 13,2
10,8 ~ 13,2
0.0 -10 ~ +60 4.5
5.0
5.5 mArms or Vr = 0Ω
2.5 -10 ~ +60 1.2
1.7
2.2 mArms or Vr = 10KΩ
0.0 -10 ~ +60 - 0.46 0.70 Adc
0.0 -10 ~ +60 50
60
72
kHz
0.0 -10 ~ +60 - 1.600 - Vrms
0.0 -10 ~ +60 -
1.0
-
sec
without load
Note 1 :
Note 2 :
Note 3 :
Note 4 :
Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked
on mechanical drawing and any conductors.
Before apply any control signal into inverter please provide Vcc first. Please follow the reversed
sequence during power off. Power off control signal first then power off Vcc.
Resistor dimming: 10kΩ – max. luminance.
Option: CCFL – fail signal
TEST CIRCUIT :
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
[e-mail]
All specifications are subject to change without notice.
Page (2)
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. : + 49 / 70 62 / 67 59 - 6
Fax: + 49 / 70 62 / 67 59 - 800
Version 1.1, 28th January 2010