PS-DA0250-01 Datasheet, PDF (2/2 Pages) Power Systems GmbH+Co.KG – DC-AC INVERTER UNIT 4 W SINGLE OUTPUTS

DC-AC INVERTER UNIT
PS-DA0250-01(S) (4 W SINGLE OUTPUTS)
ELECTRICAL CHARACTERISTICS :
(PRELIMINARY INFORMATION)
Parameters
Output Current
Input Current
Frequency
Open Circuit Voltage
Sym bols
Iout
Iin
F
Vopen
Conditions
Vrmt
Vin (V) _(V)
Tu (°C)
5±0.25 5±0.25 0 ~ +60
5±0.25 5±0.25 0 ~ +60
5 5±0.25 0 ~ +60
5±0.25 5±0.25 0 ~ +60
5±0.25 5±0.25 0 ~ +60
Specification
Min. Typ. Max.
5.3
6.0
6.7
-
20
-
-
0.8
1.0
35
45
55
1.600 1.800
-
Unit
m Arm s
%
Adc
kHz
Vrm s
Note
Dut y 100 %
Dut y min
Note 1 :
Note 2 :
Note 3 :
Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked
on mechanical drawing and any conductors.
Remote ON/OFF (CN1-3) has priority and can not be used in combination with External PWM Dimming
(CN1-4). When 'Ext.PWM' (CN1-4) is used 'Vrmt' (CN1-3) should not be connected.
The inverter is optimized for external PWM Signal of 250 Hz (TTL High Active).
The frequency could be 100 Hz ~ 2 kHz. Please take care about the vertical frequency harmonics.
TEST CIRCUIT :
SM02(8.0)B-BHS-1-TB:
SW 1
a
b
Operation of unit
Operation
Non operation
SM02B-BHS-1-TB:
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
[e-mail]
All specifications are subject to change without notice.
Page (2)
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. : + 49 / 70 62 / 67 59 - 6
Fax: + 49 / 70 62 / 67 59 - 800
Version 1.2.4, 12th February 2010