PS-DA0148-01 Datasheet, PDF (2/4 Pages) Power Systems GmbH+Co.KG – DC-AC INVERTER UNIT 5 W SINGLE OUTPUT

DC-AC INVERTER UNIT
PS-DA0148-01(S) (5 W SINGLE OUTPUT)
Input side CN1:
Pin No. Symbols
Ratings
CN 1-1
Vin
21.6 ~ 26.4 Vdc
CN 1-2
Vin
21.6 ~ 26.4 Vdc
CN 1-3
Vrm t 0 ~ 0.4 = OFF / 2.5 ~ 5.5 = ON
CN 1-4
Vbr
0 ~ 5.0 Vdc
CN 1-5
GND
-
CN 1-6
GND
-
(PRELIMINARY INFORMATION)
Output side CN2
Pin No. Symbols
CN 2-1 Vhigh
CN 2-2
N .C .
CN 2-3
Vlow
Ratings
1.000 Vrm s (5 m Arm s )
-
(GND)
ELECTRICAL CHARACTERISTICS :
Parameters
Conditions
Sym bols
Vin (V) Vbr (V) Tu (°C)
Specification
Min. Typ. Max.
Output Current
Output Current
Input Current
Frequency
Open Circuit Voltage
No Load Shotdow n
Iout
Iout
Iin
F
Vopen
Ts d
2 4 ± 1 .2
2 4 ± 0 .6
2 4 ± 1 .2
2 4 ± 1 .2
11.4
2 4 ± 1 .2
0.0 -10 ~ +50 4.5
5.0
5.5
5.0 -10 ~ +50 -
20
-
0.0 -10 ~ +50 -
0.4
0.5
0.0 -10 ~ +50 50
60
70
0.0 -10 ~ +50 2.200 2.400 2.700
0.0 -10 ~ +50 -
1.0
-
Unit
m Arm s
%
Adc
kHz
Vrm s
sec
Note
Dut y 100 %
wit ho ut lo ad
Note 1 :
Note 2:
Note 3:
Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as
marked on mechanical drawing and any conductors.
Open circuit on all lamps for more than 3 sec., will shut the inverter down.
Before apply any control signal into inverter, please provide Vcc first. Please follow the reversed
sequence during power off. Power off control signal first, then power off Vcc.
TEST CIRCUIT :
SW 1
a
b
Operation of unit
Operation
Non operation
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
[e-mail]
All specifications are subject to change without notice.
Page (2)
Address: Hauptstraße 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. : + 49 / 70 62 / 67 59 - 6
Fax: + 49 / 70 62 / 67 59 - 800
Version 1.0.1, 28th February 2008