PS-DA0130-01 Datasheet, PDF (2/5 Pages) Power Systems GmbH+Co.KG – DC-AC INVERTER UNIT 4 W SINGLE OUTPUT

PS-DA0130-01(S) (4 W SINGLE OUTPUT)
Com pone nts
No.
Part Description
Qty.
1
PCB
1
2
Connector CN1
1
3
Connector CN2
1
DC-AC INVERTER UNIT
(PRELIMINARY INFORMATION)
Material
UL94V-0 (FR-4 or CEM-3)
53261-0590
S M0 2 (8 .0 )B -B H S -1 -TB
S M0 2 B -B H S S -TB
H V-2 P -H
Note
t=1m m
Molex or equal
JST or equal
JST or equal
JAE or equal
Input side CN1:
Pin No. Symbols
CN1-1
Vin
CN 1-2
GND
CN 1-3
Vrm t
CN 1-4
Vbr
CN 1-5
Vbr
Ratings
5.0 ~ 12.0 Vdc
-
0 ~ 1.0 = OFF / 2.0 ~ Vin = ON
0 ~ 3.0 Vdc
Ext. PWM
(200~500Hz Low active)
Output side CN2 (SM02(8.0)B-BHS-1-TB)
Pin No. Symbols
Ratings
CN 2-1 Vhigh 800 Vrm s (5.0 m Arm s )
CN 2-2
Vlow
(GND)
Output side CN2 (SM02B-BHSS-1-TB)
Pin No. Symbols
Ratings
CN 2-1 Vhigh 800 Vrm s (5.0 m Arm s )
CN 2-2
Vlow
(GND)
Output side CN2 (HV-2P-H)
Pin No. Symbols
Ratings
CN 2-1 Vhigh 800 Vrm s (5.0 m Arm s )
CN 2-2
Vlow
(GND)
ELECTRICAL CHARACTERISTICS :
Parameters
Conditions
S ym bols
Vin (V) Vbr (V) Tu (°C)
Specification
Min. Typ. Max.
Output Current
Output Current
Input Current
Frequency
Open Circuit Voltage
Iout
Iout
Iin
F
Vopen
5~12
5~12
5~12
5~12
5~12
0.0 0 ~ +50 4.1
3.0 0 ~ +50 1.5
0.0 0 ~ +50 -
0.0 0 ~ +50 44
0.0 0 ~ +50 900
5.0
2.0
-
50
1.200
5.9
2.5
0.8
56
1.700
Unit
m Arm s
m Arm s
Adc
kHz
Vrm s
Note
Note 1 :
Note 2 :
Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked
on mechanical drawing and any conductors.
The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request.
the optimum is normally at 250 Hz, minimized the interference disturbances of the vertical sync.
frequency.
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
[e-mail]
All specifications are subject to change without notice.
Page (2)
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. : + 49 / 70 62 / 67 59 - 6
Fax: + 49 / 70 62 / 67 59 - 800
Version 1.1, 20th November 2007