AM1001-7R Datasheet, PDF (2/4 Pages) Power-One – 50 Watt DC-DC Converters

Cassette Style
M Series
Input
Input voltage
Inrush current limitation
6 wide-input ranges (1:5)
CM, DM, LM by thermistor
refer to selection chart
Output
Efficiency
U_{i nom}, I_{o nom}
Output voltage setting accuracy U_{i nom}, I_{o nom}
up to 83%
±0.6 % U_{o nom}
Output voltage switching noise
Line regulation
Load regulation
Minimum load
IEC/EN 61204, total
U_{i min}...U_{i max}, I_{o nom}, each output regulated
U_{i nom}, 0...I_{o nom}, each output regulated
not required
typ. 50 mV_pp
typ. ±0.3% U_{o nom}
typ. 0.15% U_{o nom}
0A
Current limitation main output rectangular U/I characteristic
Current limitation aux. output(s) rectangular U/I characteristic
Operation in parallel
by current limitation, only main outputs
typ. 110 % I_{o nom}
typ. 120 % I_{o nom}
Hold-up time
U_{i nom}, I_{o nom}, LM
typ. 100 ms
U_{i nom}, I_{o nom}, A/B/C/D/FM with ext. diode in input line up to 7 ms
Protection
Input reverse polarity
Input undervoltage lockout
Input overvoltage lockout
Input transient protection
Output
Output overvoltage
Overtemperature
built-in fuse
varistor or suppressor diode
no-load, overload and short circuit proof
suppressor diode in each output
switch-off with auto restart
typ. 80 % U_{i min}
typ. 110 % U_{i max}
typ. 150% U_{o nom}
T_C typ. 100°C
Control
Output voltage adjustment
Inhibit
Status indication
single output types
TTL input, output(s) disabled if open circuit
LEDs: OK, inhibit, overload
0...110% U_{o nom}
Safety
Approvals
Class of equipment
Protection degree
Electric strength test voltage
EN 60950, UL 1950, CSA C22.2 No. 950
AM, BM, CM, DM, FM, LM
CMZ, DMZ, LMZ
units without options
class I, I/case
class I, I/O
class II, CMZ/DMZ/LMZ, I/O and I/case
O/case
O/O
class I
class II
IP 40
2 kV AC
4 kV AC
4 kV AC
1 kV AC
0.2 kV AC
www.power-one.com
2