RNS01EE Datasheet, PDF (16/16 Pages) Power-One – RNS Series: 5-10W DC/DC Converters 18-72 & 38-75V Input 3.3V, 5.0V, 7.0V and 12V Outputs Outputs of 2.5V & 15V, available with trimming

Product Specifications
RNS Series: 5-10W DC/DC Converters
Nov 2001
18-72 & 38-75V Input
3.3V, 5.0V, 7.0V and 12V Outputs (Outputs of 2.5V & 15V, available with trimming)
Pin-Out
Pin Designation
1
+Vout
2
-Vout
3
NC
4
NC
5
NC
6
NC
7
Sync
8
Trim
9
NOR
10
TOA
11
RC
12
NC
13
NC
14
NC
15
NC
16
NC
17
-Vin
18
+Vin
Function
Positive output voltage
Output voltage return
Not connected
Not connected
Not connected
Not connected
Synchronization Input
Output voltage adjust.
Note: - To set nominal output voltage
connect pins 8 and 9 together
Connection for nominal output voltage
Turn-on/off input voltage adjust
Note: - Not Connected on
RNS01EE/RNS01EG/RNS0.9ET
Remote control. Pull low to turn unit off
Not connected
Not connected
Not connected
Not connected
Not connected
Negative input voltage
Positive input voltage
Reference
Secondary
Secondary
Secondary
Secondary
Secondary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Primary
Ordering Information
Options
Surface Mount Version, shipped
in JEDEC Tray
Suffixes to part number
Suffix “–M6”.
Through hole (leaded) version. Consult factory for availability.
Notes
1. Consult factory for the complete list of available options.
2. Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous
environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
3. Specifications are subject to change without notice.
2-Nov-01
Rev 1.1
www.power-one.com
Page 16 of 16