TQD100YGE Datasheet, PDF (1/3 Pages) Power-One – DUAL OUTPUT, 100 WATT

TQD SERIES - DUAL OUTPUT, 100 WATT
DESCRIPTION
The TQD DC/DC converters are high power, dual output,
fully isolated converters that feature high efficiency, 1500
VDC isolation, and open-frame packaging. The TQD
family allows board designers to deliver any combination
of power from either output, up to each model’s maximum
rating. The TQD series is available in 5V/3.3V or
3.3V/2.5V combinations. The TQD uses planar
magnetics and has an MTBF of over a million hours.
FEATURES
• Independent Dual
Outputs
• Flexible Load Sharing
• High Efficiency
• Open Frame Design
• Planar Magnetics
• Synchronous
Rectification
• Independent Trim For
Each Output
• 1500V Isolation
• 100°C Baseplate
Operation
TECHNICAL SPECIFICATIONS
Input
Voltage range
5 VDC nominal
12 VDC nominal
Reflected ripple
Input Reverse Voltage Protection
18 - 36 VDC
36 - 72 VDC
50 mA
Shunt Diode
Output
Setpoint Accuracy
±1%
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 1
Load Regulation Iout Min. - Iout Max., Vin Nom., Output 1
Minimum Output Current, Each Output
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
0.2% Vout
0.3% Vout
10 % Iout Rated
25% Iout
4% Vout
500 µs
Voltage Trim Range
±10%
Power Limit Threshold Range, % of Iout Rated
OVP Trip Range
UVP Trip Range
110 - 130%
115 - 140% Vout Nom.
70 - 90%
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Weight (Approx.)
20 ms
Positive Logic
250 kHz
1500 VDC
1050 VDC
500 VDC
0.03 %/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
5g
1.2 X 106 hrs
UL, cUL, TUV
3.8 oz
Efficiency vs. Load (48V Input)
90
85
80
75
70
TQD085ZED
65
TQD100ZGE
60
55
10
20
30
40
50
60
70
80
90 100
LOAD %
Notes
† _{MTBF predictions may vary slightly from model to model.}
Specifications typically at 25°C, normal line, and full load, unless
otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
REV. 10/01
1