English
Language : 

SLD10UDD Datasheet, PDF (1/2 Pages) Power-One – SLD10 Series . 10A Non-Isolated DC/DC Converter 5V, 3.3V Input Dual Output
SLD10 Series – 10A Non-Isolated DC/DC Converter
5V, 3.3V Input
Dual Output
Product Brief
Features
• Two independently regulated outputs
• Efficiency in excess of 90%
• 10A of combined output current at 65°C and
200LFM
• Flexible output load distribution
• Output overcurrent protection
• Remote ON/OFF
• Output voltage trim adjust for each output
• Straight and right angle pins configurations
Description
The SLD10 series of DC/Dc converters provide two independently regulated low-voltage outputs from a
single 3.3V or 5V input. Each output can provide up to 6A of output current and has an independent
feedback loop and an independent trim function. These non-isolated point-of-load converters are through
hole mounted. High efficiency, low space requirements, and flexible loading characteristics make these
converters ideal multivoltage sources for powering ASICs.
3.3V Input
5 V Input
3.3V input
Input
Vout1, Vout2, Eff. 5V input
Input
Vout1, Vout2, Eff.
Model
voltage VDC VDC %
Model
voltage VDC VDC %
range, VDC
range, VDC
SLD10UDD 3.0-3.6
2.5
2.5 92 SLD10VEE 4.5-5.5
3.3
3.3 93
SLD10UDC 3.0-3.6
2.5
2.0 92 SLD10VED 4.5-5.5
3.3
2.5 93
SLD10UDB 3.0-3.6
2.5
1.8 92 SLD10VEC 4.5-5.5
3.3
2.0 92
SLD10UDA 3.0-3.6
2.5
1.5 90 SLD10VEB 4.5-5.5
3.3
1.8 92
SLD10UDY 3.0-3.6
2.5
1.2 89 SLD10VEA 4.5-5.5
3.3
1.5 91
SLD10UCC 3.0-3.6
2.0
2.0 91 SLD10VEY 4.5-5.5
3.3
1.2 91
SLD10UCB 3.0-3.6
2.0
1.8 90 SLD10VDD 4.5-5.5
2.5
2.5 92
SLD10UCA 3.0-3.6
2.0
1.5 89 SLD10VDC 4.5-5.5
2.5
2.0 91
SLD10UCY 3.0-3.6
2.0
1.2 88 SLD10VDB 4.5-5.5
2.5
1.8 91
SLD10UBB 3.0-3.6
1.8
1.8 89 SLD10VDA 4.5-5.5
2.5
1.5 90
SLD10UBA 3.0-3.6
1.8
1.5 88 SLD10VDY 4.5-5.5
2.5
1.2 89
SLD10UBY 3.0-3.6
1.8
1.2 87 SLD10VCC 4.5-5.5
2.0
2.0 90
SLD10UAA 3.0-3.6
1.5
1.5 87 SLD10VCB 4.5-5.5
2.0
1.8 90
SLD10UAY 3.0-3.6
1.5
1.2 86 SLD10VCA 4.5-5.5
2.0
1.5 89
SLD10UYY 3.0-3.6
1.2
1.2 85 SLD10VCY 4.5-5.5
2.0
1.2 88
Both outputs of the SLD10U and SLD10V can be loaded up to
six (6) amps each.
SLD10VBB
SLD10VBA
SLD10VBY
4.5-5.5
4.5-5.5
4.5-5.5
1.8
1.8 89
1.8
1.5 88
1.8
1.2 87
Note: The maximum combined output is ten (10) amps.
SLD10VAA 4.5-5.5
1.5
1.5 87
SLD10VAY 4.5-5.5
1.5
1.2 86
SLD10VYY 4.5-5.5
1.2
1.2 85
REV. 07/01
www.power-one.com
Page 1 of 2