PMP25 Datasheet, PDF (1/2 Pages) Power-One – Rectifier Module

PMP 25
Rectifier Module
Description
The Power-One PMP 25 rectifier uses
resonance switch mode technology (soft
switching), and incorporates thermal
protection while providing extremely reliable
DC power in a small space. Rectifier
communication is accomplished using digital
interfaces over an RS485 data bus.
Information is transmitted to adjacent
rectifiers while providing status and
identification information to the system
controller (PCS).
At only 4 rack units high, these compact
rectifiers allow for up to five modules in each
23in. rack (4 units in 19in. rack) providing up
to 250A at 48V or up to 550A at 24V. With
full power available up to 65°C, PMP 25
rectifiers are ideal for any indoor or outdoor
application.
PPS 25 System
Shown
Features
• Compact 4 rack-unit height
• 50A output at 48V
• 110A output at 24V
• 208 / 240 single phase input
• Input over-voltage disconnect
• Hot-swappable rectifiers
• High efficiency, up to 91%
• Active current sharing
• International standards compliance
www.power-one.com