PFE1100-12-054NA Datasheet, PDF (1/22 Pages) Power-One – PFE1100-12-054xA

DATA SHEET
PFE1100-12-054xA
FEATURES
 Best-in-class, 80 PLUS certified “Platinum” efficiency
 Wide input voltage range: 90-264 VAC
 AC input with power factor correction
 Always-On 16.5 W programmable standby output (3.3/5 V)
 Hot-plug capable
 Parallel operation with active digital current sharing
 Full digital controls for improved performance
 High density design: 25.6 W/in3
 Small form factor: 54.5 x 40.0 x 321.5 mm
 I2C communication interface for control, programming and
monitoring with PSMI and PMBus™ protocol
 Overtemperature, output overvoltage and overcurrent
protection
 256 Bytes of EEPROM for user information
 2 Status LEDs: AC OK and DC OK with fault signalling
DESCRIPTION
The PFE1100-12-054xA is an 1100 Watt AC to DC power-factor-
corrected (PFC) power supply that converts standard AC mains power
into a main output of 12 VDC for powering intermediate bus architec-
tures (IBA) in high performance and reliability servers, routers, and
network switches. The PFE1100-12-054xA meets international safety
standards and displays the CE-Mark for the European Low Voltage
Directive (LVD).
BCD.00012_AI Oct-24-2013
1
APPLICATIONS
o HIGH PERFORMANCE SERVERS
o ROUTERS
o SWITCHES
www.power-one.com