IAD010YGG Datasheet, PDF (1/3 Pages) Power-One – IAD SERIES - DUAL OUTPUT, 12 WATT

(888) IPD-CONVerters ^q [phone] ^q www.ipdconverters.com
IAD SERIES - DUAL OUTPUT, 12 WATT
DESCRIPTION
FEATURES
IAD dual output DC/DC converters provide up to 12 • Industry Standard
• Optional Trim and
Watts of output power in an industry standard package
Package
Enable
and footprint. With a maximum case temperature of _{• Industry Standard}
• Wide Range Input
100°C, the IAD is well suited for the most demanding
Footprint
• 1500V Isolation
applications. The IAD features 1500 VDC isolation, _{• Fixed Frequency Design • Short Circuit Protection}
short circuit, and overtemperature protection, as well as _{• 100°C Case Operation}
six-sided shielding. The IAD is available with optional
enable and voltage trim pins. Please see the IAS series for
single output applications.
TECHNICAL SPECIFICATIONS
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input
Setpoint Accuracy
Auxillary Setpoint Accuracy
Output
Line Regulation V_in Min. - V_in Max., I_out Rated
Load Regulation I_out Min. - I_out Max., V_in Nom.
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Power Limit Threshold Range
General
Turn-On Time
Remote Shutdown
Switching Frequency
Isolation
Input - Output
Output - Case (for 48 V_in)
TemInppeurtat-uCreasCeo(efoffric2ie4ntVⁱⁿ⁾
Case Temperature
Operating Range
Storage Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF^† (Bellcore TR-NWT-000332)
Safety
Weight (Approx.)
18 - 36 VDC
34 - 75 VDC
25 mA
Shunt Diode
±1%
5%
0.5% V_out
1.0% V_out
10 % I_out Rated
25% I_out
45%00V_µoust
±10%
Hiccup
110 - 150%
300 ms
Positive Logic
400 kHz
1500 VDC
500 VDC
1050 VDC
±0.03%/°C
-40 To +85°C
-40 To +110°C
95%
5 g, 10 - 55 Hz
1.8 X 10⁶ hrs
UL, CUL, VDE
1.2 oz
90
85
80
75
70
65
60
55
50
10
Efficiency vs. Load (48V Input)
EFF. IAD010ZGG
EFF. IAD012ZHH
EFF. IAD012ZJJ
20 30 40 50 60 70 80
LOAD %
90 100
Notes
† _{MTBF predictions may vary slightly from model to model.}
†† _{Industrial temp range available}
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Units are water-washable and fully compatible with commercial spray or immersion
post wave-solder washing equipment.
C-70