HBT060ZGHH Datasheet, PDF (1/12 Pages) Power-One – HBT Series . Half-Brick DC/DC Converter 48V Input 60 Watt Triple Output

HBT Series – Half-Brick DC/DC Converter
48V Input
60 Watt Triple Output
Data Sheet
Applications
• Distributed power architectures
• Data and Telecommunications Equipment
• Computer Equipment
• Distributed power architectures
• LAN/WAN applications
• Data processing applications
Features
• 60 Watts maximum total output power
• Three fully isolated outputs 5V/12V/12V
• 5V output provides up to 12 Amps
• (2) 12V outputs each provide up to 2.5 Amps
• Excellent cross regulation
• Low profile – 12.7 mm
• High efficiency topology, 88% Typical
• Output overcurrent & overvoltage protection
• Overtemperature protection
• Set point accuracy ± 2.0%
• 1500V Input/output isolation meets basic
insulation requirements
• UL 1950 Recognized, CSA 22.2 No. 950-95
certified; TUV IEC950
Description
The HBT17ZGHH DC-DC Converter operates over an input voltage range of 33Vdc to 75Vdc and provides
three isolated output voltages. The 5V output can provide a full 60W (12 Amperes) of output power and each
12V output can provide up to 30W (2.5 Amperes) of output power. The input is fully isolated from each
output and each output is isolated from one another. The isolation of each output provides flexible output
configurations and separate output returns, which are important in preventing cross-interference between
different loads in system applications. The module has a typical full load efficiency of 88%.
The two-board construction optimizes thermal performance. Power devices are connected to an Integrated
Metal Substrate base plate to minimize thermal impedance and a separate control board is physically
isolated from the hotter IMS board. This approach allows for lower average component temperatures on the
control board and increases the overall reliability. The comprehensive standard feature set includes remote
on/off, and output trim.
Model
HBT060ZGHH-A
Input
voltage
range,
VDC
33-75
Selection Chart
Input
Output
Output
current, voltage, VDC
rated
max,
current,
ADC
ADC
3.0
5.0/12.2/12.2 12/2.5/2.5
Output Ripple Efficiency
and Noise,
%
mV p-p
125/150/150
88
REV. 10/01
www.power-one.com
Page 1 of 12