HBC48T25120 Datasheet, PDF (1/16 Pages) Power-One – HBC48T25120 DC-DC Converter Data Sheet

HBC48T25120 DC-DC Converter Data Sheet
36-75 VDC Input; 12 VDC @ 25 A Output
Applications
 Telecommunications
 Data communications
 Wireless communications
 Servers, workstations
Benefits
 Cost-effective, single board design with optional
attached baseplate for cold plate cooling
applications and enhanced power capability.
 High efficiency – no heat sink required
Features
 RoHS lead-free solder and lead-solder-exempted
products are available
 Delivers up to 25 A of output
(13.5 A @ 70 °C, 200 LFM)
 Industry-standard half-brick pinout
 Optional baseplate attachment
 On-board input differential LC-filter
 Startup into pre-biased load
 No minimum load required
 Dimensions: 2.40” x 2.28” x 0.50”
(61.0 mm x 57.9 mm x 12.7 mm)
 Meets Basic Insulation requirements of EN60950
 Withstands 100 V input transient for 100 ms
 Fixed frequency operation
 Remote output voltage sense
 Fully protected with automatic recovery
 Positive or negative logic ON/OFF option
 Output voltage trim range: +10%/−20% with
industry-standard trim equations
 High reliability: MTBF approx. 8.7 million hours,
calculated per Telcordia TR-332, Method I Case 1
 Recognized to UL60950-1/CSA 22.2 No. 60950-1,
and TUV approved to IEC_EN60950-1
 Designed to meet Class B conducted emissions per
FCC and EN55022 when used with external filter
 All materials meet UL94, V-0 flammability rating
Description
The HBC48T25120 power module is an open frame half-brick DC-DC converter providing a regulated and isolated
output voltage of 12.0 VDC with an output current up to 25 A suitable for today’s Distributed Power Architecture
applications. It offers outstanding thermal performance in high temperature environments.
This performance is accomplished through the use of patented/patent-pending circuits, packaging, and processing
techniques to achieve ultra-high efficiency, excellent thermal management, and a low mechanical profile.
This low-body profile minimizes impedance to system airflow, thereby enhancing cooling for both upstream and
downstream devices. For extended cooling purposes, a baseplate option is available. Attaching a heat sink or cold
plate further enhances the unit’s capability. The use of 100% automation for assembly, coupled with advanced
electronic circuits and thermal design, results in a product with extremely high reliability.
Operating from a 36-75 V input, the HBC48T25120 converter provides an output that can be trimmed from –20%
to +10% of the nominal output voltage, thereby providing outstanding design flexibility.
.
MCD10127 Rev. 1.1, 09-Jun-10
Page 1 of 16
www.power-one.com