|
FC100V5A Datasheet, PDF (1/2 Pages) Power-One – FC SERIES - 5A, 10A, 20A, FILTER | |||
|
(888) IPD-CONVerters G (888) 473-2668 G www.ipdconverters.com
FC SERIES - 5A, 10A, 20A, FILTER
DESCRIPTION
FEATURES
FC100 industry standard input filter modules provide up ⢠Meets Class B
⢠Industry Standard
to 30 dB of common mode and differential mode filtering Conducted Limits
Pinout
at 500 kHz. The FC100âs are available in 5A, 10A, and ⢠Optimized For
⢠-40°C to 100°C Case
20A versions and are optimized for operation with Power- Power-Oneâs High
Operation
Oneâs high density, board-mounted products. The filters Density, Board-Mounted⢠>30 dB Insertion Loss at
can be operated with up to 100 VDC input and have
Products
500 kHz
1000 VDC isolation.
⢠PCB Mountable
⢠100 VDC Operation
⢠Common Mode and
Differential Mode
Filtering
TECHNICAL SPECIFICATIONS
Maximum Input Voltage
Line-to-Case Operation
Input Frequency
Input
100 VDC
1000 VDC
100 Hz
Maximum Average Current
400 LFM Airflow
Natural Convection
Output
Iout Max.
70% Iout
General
Isolation
Input - Case
Case Temperature
Operating Range @ Iout Max.
Operating Range @ 70% Iout Max.
Storage Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBFâ (Bellcore TR-NWT-000332)
Safety
1000 VDC
-40 to +60°C
-40 to +80°C
-40 to +125°C
95%
5 g, 10 - 55 Hz
Consult Factory
Consult Factory
Rev. 05/01
Notes
â MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
1
|
▷ |