6384-2 Datasheet, PDF (2/4 Pages) Pomona Electronics – Model 6384 Assembly Instructions Banana Jack, User Installed

Pomona^®
Model 6384 & Assembly Instructions
Banana Jack, User Installed
(18-22 AWG)
FIGURE #1
A. Slide plastic housing over wire.
B. Place stripped wire (18, 20, or 22 AWG) end into terminal hole.
FIGURE #2
C. Crimp terminal using a bare-terminal style crimper. Retention force of joint should exceed 12 pounds to assure no
damage occurs to joint when housing is snapped into place.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 909-469-2900 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\d6384_2_01.doc
PomonaACCESS 90836 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 2 of 2