72907 Datasheet, PDF (1/1 Pages) Pomona Electronics – Mini SMD Grabber Test Clip with Lead and 2mm Jack

Models 72907
Mini SMD Grabber Test Clip with Lead and 2mm Jack
Test lead with Mini Smd
Grabber Test Clip to 2mm Jack
Features
• Mini SMD Grabber Test Clip (Pomona 72906)
with 20 inch (50cm) lead and 2mm Jack. (Black)
Materials
• Connector Body is Nickel plated Brass.
• Connector insulation is Polypropylene
• 0.8mm Socket is Gold over Nickel plated Brass.
• Insulation of 0.8mm is Elastomere
• Wire is Silicone.
Ordering Information
Model: 72907-20-Color
Available Colors: Black (-0), Red (-2)
Specifications
Max Current
Max Voltage
Temperature Rating
Max Resistance
Max. 1A
33 V AC / 70 V DC
-20˚ C + 80˚ C
Less than 8 mΩ
Rating: hands free testing in controlled environment:
70Vrms max. For CE compliance: Not intended for hand-
held use at voltages above 33Vrms/70Vdc
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2004 1/20/06 72907 Rev A Page 1 of 1 Page 1 of