72906 Datasheet, PDF (1/1 Pages) Pomona Electronics – Mini SMD Grabber Test Clips

Models 72906
Mini SMD Grabber Test Clips
Mini SMD Grabber Test Clips
Features
• Designed for easy attachment to SMD chips
with pitches down to 0.032” (0.80 mm)
• Insulated shaft can be bent up to 36 degrees for
versatile attachment in awkward locations or
close proximity to other clips
• Rotating jaws increase versatility in connection
and stacking.
• Thin (3mm) profile allows close placement to
adjacent clips.
• Compatible with leads with Ø0.8 mm female
connectors
• Order Pomona model number 72905-0 for clip
lead for SMD Mini Grabber - 0.8mm female/4 mm
female for easy attachment to standard test
leads.
Materials
• Insulation: Polyamide
• Jaws: Steel
Ordering Information
Model: 72906-Color
Available colors: Black (-0), Red (-2)
Specifications
Max Current Admissible
Voltage; Max - Tension
Temperature
Max Resistance
1A
33 V AC / 70 V DC
-20˚ C + 80˚ C
Less than 15 mΩ
Rating: hands free testing in controlled environment:
70Vrms max. For CE compliance: Not intended for hand-
held use at voltages above 33Vrms/70Vdc
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2004 1/20/06 72906 Rev A Page 1 of 1 Page 1 of