7207 Datasheet, PDF (1/2 Pages) Pomona Electronics – BNC (M) 50 Ω

Models 7207
BNC (M) 50 Ω RG58, 141, 223, 303, Belden 7806A, LMR195
Model 7207 BNC (M), Wrench Crimp
Ideal for 50 Ω coax cable
applications.
Features
Designed for common cables (see table below for cable
types). Precision machined. Gold plated (15 micro–
inches) contacts. Insulation material is PTFE (not Delrin).
Materials
Body: Machined brass with tarnish resistant nickel plating.
• Center pin contact: Gold plated (15 micro-inches)
brass.
• Body made from precision machined high quality brass
(not die cast).
• High quality machined PTFE dielectric.
Ordering Information
Model: 7207 BNC (M) 50 Ω
Specifications
Nominal Impedance
50 Ω
Frequency
0-4 GHz
VSWR
1.30 max.
Center / Outer Contact
Resistance
1.5 / 1.0 milliohms
Number of Insertions
500
Insulation Resistance
5000 Megohms (min)
Dielectric Withstand Voltage 1500 Vrms
Ratings: Voltage: 500 Vrms
Operating Temperature: -85 °F to +131 °F (-65 °C to
+55 °C) Max.
Connector
Model #
7207
Cable Groups
RG58, 58A, 58C, 141,
233, 303, Belden
7806A, LMR195
Crimp Die set*
Size (Hex/Pin)
N/A
USA: Sales: 800-490-2361
Technical Support: 800-241-2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright © 2005 1/2005 2431231 D-ENG-N Rev A Page 1 of 2 Page