7042 Datasheet, PDF (1/2 Pages) Pomona Electronics – BNC (M) Crimp 75 Ω

Models 7042, 7043 BNC (M) Crimp 1407B 75 Ω , BNC (M)
8241 75 Ω
Model 7042 BNC (M) 75 Ω Belden 1407B
Model 7043 BNC (M) Belden 8241
Use for your 75 Ω broadcast
cable assemblies and
applications.
Features
• True 75 Ω BNC connector
• Designed for common Belden cables (see table
on page 2 for cable types and crimp die
information)
• Precision machined. Gold plated (15 micro–
inches) contacts. Insulation material is PTFE (not
delrin)
Materials
• Body is machined brass with tarnish resistant
nickel plating.
• Male center pin contacts are gold-plated (15
micro-inches) brass.
• High quality machined PTFE dielectric.
See page 2 for cable type, crimp information and cable
assembly instructions.
Specifications
Nominal impedance
75 Ω
Frequency
0-3 GHz
VSWR
Center / Outer contact
resistance
Number of insertions
1.10 max. 0-3 GHz
1.5 / 1.0 mΩ
500
Insulation resistance
5000 MΩ (min)
Dielectric withstand voltage 1500 Vrms
Ratings: Voltage: 500 Vrms
Operating temperature: -85 ˚F to +131 ˚F (-65 ˚C to
+155 ˚C) Max.
Ordering Information
Model: 7042, BNC (M) Coaxial 1407B…(75 Ω).
Model: 7043, BNC (M) Coaxial Belden 8241…(75 Ω).
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright 2004 9/2004 2398570 D-ENG-N Rev A Page 1 of 2