7040 Datasheet, PDF (1/2 Pages) Pomona Electronics – BNC (M) Crimp 50 Ω

Models 7040
BNC (M) Crimp 50 Ω RG174, 188, 188A, 316
Model 7040 BNC (M) 50 Ω Crimp
Use for your 50 Ω coax cable
assembly applications.
Features
• Designed for common cables (see table on page
2 for cable types and crimp die information).
• Precision machined.
• Gold plated (15 micro–inches) contacts.
• Insulation material is PTFE (not delrin).
Materials
• Body is machined brass with tarnish resistant
nickel plating.
• Male center pin contacts are gold-plated (15
micro-inches) brass.
• High quality machined PTFE dielectric.
Ordering Information
Model: 7040, BNC (M) Crimp 174,188,188A, 316.
See page 2 for cable type, crimp information and cable
assembly instructions.
Specifications
Nominal impedance
50 Ω
Frequency
0-4 GHz
VSWR
Center / Outer contact
resistance
Number of insertions
1.30 max. 0-4 GHz
1.5 / 1.0 mΩ
500
Insulation resistance
5000 MΩ (min)
Dielectric withstand voltage 1500 Vrms
Ratings: Voltage: 500 Vrms
Operating Temperature: -85 ˚F to +131 ˚F (-65 ˚C to
+155 ˚C) Max.
USA: Sales: 800-490-2361 Technical Support: 800-241-
2060 Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
e-mail: [e-mail]
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks
are the property of their respective companies.
Copyright 2004 9/22004 2398626 D-ENG-N Rev A Page 1 of 2