6384 Datasheet, PDF (1/3 Pages) Pomona Electronics – Assembly Instructions

Pomona^®
Model 6384 & Assembly Instructions
Banana Jack, User Installed
(18-22 AWG)
FEATURES:
• Attaches to your wire with commonly available crimp tools or by soldering.
• Can be used on stranded wire from 18 to 22 AWG with an insulation diameter from 0.060” to 0.150”.
• Provides safe and secure connections to 4mm shrouded banana plugs.
• Fits Pomona shrouded banana plugs and most other shrouded banana plugs, will also fit most banana plugs
without shrouds.
• Will comply with IEC1010 CAT II, 300V when properly assembled.
MATERIALS:
Banana Jack: Nickel Plated Brass.
Insulation: Santoprene® (Thermoplastic Elastomer).
RATINGS:
Operaging Voltage: 300V Max. (Hand Held); 1,500V Max. (Non-Hand Held)
Current: 5 Amperes 20-22 AWG, 15 Amperes 18 AWG
Operating Temperature: -20°F to 275°F (-29°C to 135°C)
Storage: -40°F to 302°F (-40°C to 150°C)
ORDERING INFORMATION: Model 6384-(*).
* = Color, (-0) Black, (-2) Red, (10 per package). (-02) 1 of each color.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 909-469-2900 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
T:\Release\DataSheets\FlukeDataSheet\FlukeDataSheet\d6384_2_01.doc
PomonaACCESS 90836 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1