6108 Datasheet, PDF (1/1 Pages) Pomona Electronics – 40 In. SOIC Clip Test Clip

Pomona^®
Model 6108
40 In. SOIC Clip® Test Clip
Lead Spacing: 0.050” (1,27)
These new test clips are
designed especially for in-circuit
testing on 40 pin Small Outline
Integrated Circuits (SOIC & SOJ).
The SOIC Clip^® test clip assures a
positive connection to all chip
leads and provides hands-free
testing.
• Upper contacts are .025" (0,63)
sq. pins on 0.100" (2,54)
centers. Pins are perfect for sq.
pin receptacles, wire-wrap or
soldered wires.
• Gold plated upper contacts fit standard double row ribbon cable connectors..
• Gold plated lower contacts assure reliable, noise free connections.
• Molded barriers between each contact allow connections to be made on live boards
without accidental shorting to adjacent chip leads.
• Open back of clip allows probing of chip leads while the clip is attached.
• Fits all 40 pin surface mounted SOIC and SOJ chips from .30" (7,62) to .60" (15,24)
wide.
• Compact design requires a minimum of board space. Clips can be placed on chips that
are spaced only .040" (1,02) apart, end-to-end. The clip requires .14" (3,56) beyond
each side of the chip for placement.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 800-490-2361 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
C:\Laura Goldberg\FlukeDataSheet\d6108_1_01.doc
PomonaACCESS 90320 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1