6106 Datasheet, PDF (1/1 Pages) Pomona Electronics – DMM RF Detector Test Probe

Model 6106
DMM RF Detector Test Probe
Model 6106
DMM RF Detector Test Probe
Features
• Display RF voltages on multimeters
• Based on the use of high reliability SMD
components
• Narrow-body monolithic probe will measure AC
voltages of sinusoidal wave shapes between 500Hz
and 1GHz
• Works best on multimeters with 10MΩ input
impedance
• Conversion factor is 1 VDC for an input of 1 VRMS
of the sine wave signal
USA: Sales: 800-490-2361
Technical Support: [e-mail]
Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
Materials
Scope Probe
Probe Tip: Body – Brass, Gold Plated
Insulation: Thermoplastic
Cable: RG 174/U
Banana Plug: Body – Brass, Nickel Plated
Insulation: Thermoplastic, Black and Red
Specifications
Model Number
Bandwidth
Peak AC Input
DC Isolation Incl.
Peak AC
Turn-On Voltage
6106
1MHz to 1GHz
± 1.5dB
30V
100V
350mV
Input Capacitance
Cable Length
6pF
4ft (1.2m)
Ordering Information
Model: 6106
DMM RF Detector Test Probe
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2008 D1094453 Rev. 100
Page 1of 1