6086 Datasheet, PDF (1/3 Pages) Pomona Electronics – ESD Wrist Strap Tester

Model 6086
ESD Wrist Strap Tester
FEATURES:
Touch type on-demand tester and common point
ground
Test any wrist strap connected to utility ground with a
simple touch
Tester has two Banana Plug Sockets for Wrist Strap
cord attachments
Once connected, the user simply touches the unit and a
green light and audible sound indicate a proper ground
Audible indicator has selectable on or off
Tester can be mounted near your work area with
Velcro® strips or, using an integral button 10mm snap
stud, attached directly to your static-safe work mat.
Powered by a 120 VAC wall adapter, the tester has a
“Power on” indicator
It is practical for both a quick test or as a continuous
ground point connection
UL listed
MATERIALS:
Wrist Tester:
Snap Socket (Rear): 10mm (.39), Nickel Plated
Banana Plug Sockets: Nickel Plated
AC Adapter Jack: Nickel Plated
AC Adapter: 120 VAC wall adapter (12 VDC Power Supply)
Velcro Strip: Adhesive backed hook and loop mounting pads
ORDERING INFORMATION: Model 6086
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: [phone] Technical Support: 800-241-2060 ([e-mail])
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 100
D1094536
Page 1 of 3