5961-2 Datasheet, PDF (1/1 Pages) Pomona Electronics – Model 5961 and 5961-2 Metric QFP Test Clips, 44 Pin EIAJ 80mm Pitch, 3,2mm and 3,9mm Footprint

Pomona^®
Model 5961 and 5961-2
Metric QFP Test Clips, 44 Pin EIAJ
80mm Pitch, 3,2mm and 3,9mm Footprint
These new test clips provide an easy
means to connect instrumentation to fine pitch
QFP chip leads.
• Interfaces with high density QFP surface
mount chips.
• Two stage alignment assures positive
connections.
• Gold plated connector pins and contacts
assure noise free connections.
• Gold plated .025" square pins provide easy
connection with either ribbon cable or
discrete jumpers.
Pomona's EIAJ test clips are perfect for
system design, field service testing, failure
analysis, and for use with logic analyzers.
Other clips are also available in other sizes
to fit the most popular EIAJ chips now in use.
Pomona offers a test clip to fit the most
commonly found variations on the EIAJ
specifications.
Leads
D
(mm)
13.9
13.2
Body
D1
(mm)
10.0
10.0
Lead
Interface
C (in)
.484"
.457"
Chip
Height
A (mm)
3.4
3.4
Pomona
Part Number
5961
5961-2
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 800-490-2361 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
C:\Laura Goldberg\FlukeDataSheet\d5961_61-2_1_01.doc
PomonaACCESS 90418 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1