5751L Datasheet, PDF (1/1 Pages) Pomona Electronics – 80 Pin QFP Locking Test Clip

Pomona^®
Model 5751L
80 Pin QFP Locking Test Clip
0.80mm Lead Pitch
These new test clips provide the user
with an easy means to connect your test
instruments to surface mounted, fine pitch 80
pin QFP chips.
The special locking fingers at each
corner attach to the body of the chip and hold
the clip firmly against the chip leads.
• Centrally activated locking mechanism
allows testing vertical boards.
• Interfaces with high density EIAJ QFP
surface mount chip leads.
• Two-stage alignment assures positive
connections.
• Gold plated connector pins and contacts assure noise free connections.
• Gold plated .025" square pins provide easy connection with either ribbon cable or discrete jumpers.
Pomona's EIAJ test clips are perfect for logic analyzers, field service testing, failure analysis, and for use
with emulators. Other clips are also available in other sizes to fit the most popular EIAJ chips now in use.
Pomona offers a test clip to fit the most commonly found variations on the EIAJ specifications.
“D1"
“D"
“E1”
“E”
“A”
“C”
Pomona
Body (mm) Leads(mm) Body (mm) Leads(mm) Height(mm) Interface Dim Part Number
20
23.9
14
17.9
3.4
16.3 X 22.3 5751L
(.642" X .878")
20
23.2
14
17.2
3.4
15.6 X 21.6 5751L-2
(.614" X .850")
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Made in USA
08/30/99
SY/EH/LS
Sales: 909-469-2900 Fax: [phone]
Technical Assistance: 800-241-2060
R:\Release\DataSheet\To_Marketing_99C\D5751L_1_01.doc
PomonaACCESS 90365 [phone] or [phone]
More drawings available at www.pomonaelectronics.com