5514 Datasheet, PDF (1/1 Pages) Sumida Corporation – Wire Wound Chip Inductors

Pomona^®
These new test clips are designed especially for in-
circuit testing on Small Outline Integrated Circuits
(SOIC & SOJ). The SOIC Clip test clip assures a
positive connection to all chip leads and provides
hands-free testing.
• Upper contacts are .025” sq. pins, spaced at .100”.
Pins are perfect for sq. pin receptacles, wire-wrap
or jumper leads.
• Gold plated lower contacts assure reliable, noise
free connections.
• Molded barriers between each contact allow
connections to be made on live boards without
accidental shorting to adjacent chip leads.
Fits surface mounted SOIC and SOJ chips with gull
wing or “J” leads and body width from .150” to .350”
wide.
ORDERING INFORMATION: Model 5514 Kit
Containing 6 SOIC Clips with case.
5250 – 8 Lead Clip, 5251 – 14 Lead Clip, 5252 – 16
Lead Clip, 5253 – 20 Lead Clip, 5254 – 24 Lead Clip,
5437 – 28 Lead Clip See
See Pomona Access 90320 for more details
Model 5514
SOIC Clip Test Clip Kit
8, 14, 16, 20, 24 & 28 Leads
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 800-490-2361 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
C:\Laura Goldberg\FlukeDataSheet\d5514_1_01.doc
PomonaACCESS 90766 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1