4274 Datasheet, PDF (1/1 Pages) Pomona Electronics – Multi-Stacking Banana Plug Patch Cord with In-Line Fuse Holder

Model 4274
Multi-Stacking Banana Plug Patch Cord with In-Line Fuse Holder
Model 4274
Multi-Stacking Banana Plug Patch Cord
with In-Line Fuse Holder
Features
• Provides protection from over current.
• Accepts standard .25 inch (6.4mm) diameter SFE
and AGC fuses (fuse not included).
• Mates to Model #1581, 2854 or any standard
banana jack.
• Vertical and cross stackable.
Materials
Connector: Stacking Banana Plug:
Material: Brass body, Beryllium Copper spring,
nickel plated.
Insulation: Polypropylene.
Wire: 18 AWG, 65 x 36 t.c., PVC insulated, 3.7 (.144)
O.D. Fuse holder, brass, tin plated.
Insulation: PVC. Accepts 6.4 (.25) dia. SFE and
AGC fuses (not included).
Specifications
Operating Temperature: +55ºC (+131ºF) Max.
Voltage:
For CE Compliance and for personal safety, do
not hold in hand when voltages exceed
33Vrms/70Vdc.
Maximum voltage for hands free use in a
controlled voltage environment: 5000 WVDC
Max.
Current: 15 Amperes
Ordering Information
Model: 4274-XX-*
XX = Cable Lengths, Standard Lengths: 36” (914)
Additional lengths may be quoted upon request.
* = Color, -0 Black, -2 Red
Ordering Example: 4274-36-2 Indicates 36” in
length, color is Red.
USA: Sales: 800-490-2361
Technical Support: [e-mail]
Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2009 D1094098 Rev. 100
Page 1 of 1