4011-0 Datasheet, PDF (1/1 Pages) Pomona Electronics – Minigrabber® With 6-32 Threaded Insert

Pomona^®
Model 4011
Minigrabber® With 6-32
Threaded Insert
FEATURES:
• This grabber test clip can be used with
oscilloscope leads equipped with a 6-32 screw.
• Use with Model #4311 to make custom cables.
MATERIALS:
Minigrabber:
Contact: Beryllium Copper, Alloy 165 per QQ-
C-533.
Spring: Stainless steel, CRES 302, passivated.
Threaded Insert: Brass per QQ-B-626,
Alloy 360, ½ Hard.
Finish:
Contact: Gold plated per MIL-G-45204, Type
1, Class 00
Insulation:
Glass filled Nylon
Color: See ordering instructions.
Marking: “MINIGRABBER®” “POMONA”
RATINGS:
Operating Temperature: +102°C. (+216°F.) Max.
Operating Voltage:30VAC/60VDC
Current: 5 Amperes
ORDERING INFORMATION: Model 4011-*
*=Color, -0 Black, -2 Red
Ordering Example: 4011-2 Adapter Color is Red
Additional colors are available upon request.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 800-490-2361 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
S:\Engineering \Release\DataSheets\FlukeDataSheet\d4011_1_01.doc
PomonaACCESS 90588 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1