1326 Datasheet, PDF (1/1 Pages) Pomona Electronics – Double Banana Plug One End Only

Pomona^®
Model 1326
Double Banana Plug One End Only
Part Number Schematic Cable Type
Diameter Impedance
Length
1326-A-60
1326-C-60
2
Twisted Pair .250” (6,35 mm)
-
60” (152,4 cm)
1
RG58C/U .195” (4,95 mm) 50 Ohms 60” (152,4 cm)
FEATURES:
• This double banana plug cable is designed to be
• The one-piece Beryllium Copper leaf spring
used with all standard .166” (4mm) diameter
with hard nickel plating is swaged into the
banana jacks.
• These jacks are usually spaced at .75” (19mm)
apart. Pomona’s double banana plugs can be
solid brass banana plug body.
MATERIALS:
The plug is insert molded with black polypropylene
used with most digital multimeters that have the (1326-C-).
common and volt-ohm jacks at the standard
The plug is insert molded with gray polypropylene (1326-
spacing.
• This cable is also suited for use with power
supplies that have binding post outputs
• The Pomona Banana Plug is well known for
A-).
RATINGS:
Operating Temperature: +55° C (+131° F) Max.
1326-A 300VAC/424VDC
durability and reliability.
• We take considerable pride in the materials and
workmanship that go into this plug.
1326-C 500VRMS
ORDERING INFORMATION: Model 1326
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
6/9/99
Sales: 800-490-2361 Fax: [phone]
SY/EH/LS
Technical Assistance: 800-241-2060
S:\Engineering \Release\DataSheets\FlukeDataSheet\d1326_1_01.doc
PomonaACCESS 90503 [phone] or [phone]
More drawings available at www.pomonaelectronics.com
Page 1 of 1