1325 Datasheet, PDF (1/1 Pages) Pomona Electronics – Standard Banana Jacks, Solderless and Stackable

Model 1325, 5230, 5406, 6546
Standard Banana Jacks, Solderless and Stackable
Standard Banana Vertical
Stack-Up Jack
Features
• Designed to fit on the end of any 22 AWG to 18 AWG wire.
• Cross hole wire entry fits wires up to .12” (3mm) diameter.
• Available with tarnish resistant nickel or gold plating for
very low contact resistance.
• Model 5230 is rated to temperatures up to +302°F
(+150°C).
• Set screw simplifies assembly of test leads and jumpers
by using a flat blade screwdriver.
• Fits standard panel and binding post banana jacks .161” to
.166” (4,0mm to 4,2mm) diameter.
Materials
Banana Jack:
Banana Plug:
Insulation:
Set Screw:
Beryllium Copper, Gold Plated
Body – Brass, Nickel Plated (Model 5406 Gold Plated)
Spring – Beryllium Copper, Nickel Plated (Model 5406 Gold Plated)
ABS (Model 5230 Polyphenylene Sulfide)
Steel, Zinc Plated, 8-32 Single Slot
Ratings
Voltage:
For CE compliance and for personal safety, do not hold in hand when voltages exceed 33 Vrms/70 Vdc.
Maximum voltage for hands free use in controlled testing environments: 5000 Vrms Max. Do not use on
circuits where transient stresses can exceed the rated voltage.
Current:
15 Amps
Maximum Operating Temperature:
+122ºF (+50ºC) max. (Model 5230: +302ºF (+150ºC) max.)
Ordering Information
Model: 1325-color Nickel Plated Banana with ABS Insulation
Color: 0=Black, 1=Brown, 2=Red, 3=Orange, 4=Yellow, 5=Green, 6=Blue, 7=Violet, 8=Gray, 9=White,
02=set of Black and Red
Ordering example:
1325-5 (1325 with green ABS insulation)
Model: 5406-0 Gold Plated Banana Plug with ABS Black Insulation
Model: 5406-2 Gold Plated Banana Plug with ABS Red Insulation
Model: 5230-0 Nickel Plated Banana with High Temperature Black Insulation (Polyphenylene Sulfide)
Model: 5230-6 Nickel Plated Banana with High Temperature Blue Insulation (Polyphenylene Sulfide)
Model: 6546 Package of ten 1325, one of each color.
Model: 4914 Replacement Set Screws, package of 100.
USA: Sales: 800-490-2361
Technical Support: [e-mail]
Fax: [phone]
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2009 D1093603 Rev. 101
Page 1 of 1