TISP3070H3SL Datasheet, PDF (1/12 Pages) Power Innovations Ltd – DUAL BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS

TISP3070H3SL THRU TISP3095H3SL, TISP3125H3SL THRU TISP3210H3SL
TISP3250H3SL THRU TISP3350H3SL
DUAL BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
Copyright © 1999, Power Innovations Limited, UK
JANUARY 1999 - REVISED MAY 1999
TELECOMMUNICATION SYSTEM 2x100 A 10/1000 OVERVOLTAGE PROTECTORS
q Ion-Implanted Breakdown Region
- Precise DC and Dynamic Voltages
SL PACKAGE
(TOP VIEW)
DEVICE
‘3070
‘3080
‘3095
‘3125
‘3135
‘3145
‘3180
‘3210
‘3250
‘3290
‘3350
V_DRM
V
58
65
75
100
110
120
145
160
190
220
275
V_(BO)
V
70
80
95
125
135
145
180
210
250
290
350
T
1
G
2
R
3
device symbol
T
MDXXAG
R
q Rated for International Surge Wave Shapes
- Guaranteed -40 °C to +85 °C Performance
WAVE SHAPE
STANDARD
I_TSP
A
2/10 µs
GR-1089-CORE 500
8/20 µs
IEC 61000-4-5
300
10/160 µs
FCC Part 68
250
10/700 µs
FCC Part 68
200
ITU-T K20/21
10/560 µs
FCC Part 68
160
10/1000 µs GR-1089-CORE 100
SD3XAA
G
Terminals T, R and G correspond to the
alternative line designators of A, B and C
q 3-Pin Through-Hole Packaging
- Compatible with TO-220AB pin-out
- Low Height. . . . . . . . . . . . . . . . . . . . .8.3 mm
q Low Differential Capacitance
- Value at -2 V/-50 V Bias. . . . . . . .67 pF max.
description
The TISP3xxxH3SL limits overvoltages between the telephone line Ring and Tip conductors and Ground.
Overvoltages are normally caused by a.c. power system or lightning flash disturbances which are induced or
conducted on to the telephone line.
The protector consists of two symmetrical voltage-triggered bidirectional thyristors. Overvoltages are initially
clipped by breakdown clamping until the voltage rises to the breakover level, which causes the device to
crowbar into a low-voltage on state. This low-voltage on state causes the current resulting from the
overvoltage to be safely diverted through the device. The high crowbar holding current prevents d.c. latchup
as the diverted current subsides.
This TISP3xxxH3SL range consists of eleven voltage variants to meet various maximum system voltage
levels (58 V to 275 V). They are guaranteed to voltage limit and withstand the listed international lightning
surges in both polarities. These high current protection devices are in a 3-pin single-in-line (SL) plastic
package and are supplied in tube pack. For alternative impulse rating, voltage and holding current values in
SL packaged protectors, consult the factory. For lower rated impulse currents in the SL package, the 35 A
10/1000 TISP3xxxF3SL series is available.
These monolithic protection devices are fabricated in ion-implanted planar structures to ensure precise and
matched breakover control and are virtually transparent to the system in normal operation.
PRODUCT INFORMATION
Information is current as of publication date. Products conform to specifications in accordance
with the terms of Power Innovations standard warranty. Production processing does not
necessarily include testing of all parameters.
1