PM5349 Datasheet, PDF (25/252 Pages) PMC-Sierra, Inc – Quad 155 Mb/s ATM Physical Layer Device

S/UNI-QUAD
DATASHEET
PMC-971239
ISSUE 6
PMC-Sierra, Inc.
PM5349 S/UNI-QUAD
SATURN USER NETWORK INTERFACE (155-QUAD)
Pin Name
DTCA[4]
DTCA[3]
DTCA[2]
DTCA[1]
RDAT[15]
RDAT[14]
RDAT[13]
RDAT[12]
RDAT[11]
RDAT[10]
RDAT[9]
RDAT[8]
RDAT[7]
RDAT[6]
RDAT[5]
RDAT[4]
RDAT[3]
RDAT[2]
RDAT[1]
RDAT[0]
Type
Output
Output
Pin Function
No.
K22 UTOPIA Direct Transmit Cell Available (DTCA[4:1]).
K23
L20
L21
These output signals provide direct status indication
of when a cell is available in the transmit FIFO for
the corresponding port. When high, DTCA indicates
that the corresponding transmit FIFO is not full and
a complete cell may be written. When DTCA goes
low, it can be configured to indicate either that the
corresponding transmit FIFO is near full or that the
corresponding transmit FIFO is full. DTCA will
transition low on the rising edge of TFCLK after the
Payload word 19 (TCALEVEL0=0) or 23
(TCALEVEL0=1) is sampled if the PHY being polled
is the same as the PHY in use. To reduce FIFO
latency, the FIFO depth at which DTCA indicates
"full" can be set to one, two, three or four cells. Note
that regardless of what fill level DTCA is set to
indicate "full" at, the transmit cell processor can
store 4 complete cells
DTCA[4:1] are updated on the rising edge of
TFCLK.
U23
U22
T20
U21
V22
W23
U20
V21
W22
Y23
W21
Y22
AA23
W20
Y21
AA20
UTOPIA Receive Cell Data Bus (RDAT[15:0]).
This data bus carries the ATM cells that are read
from the receive FIFO selected by RADR[4:0].
RDAT[15:0] is tri-stated when RENB is high.
RDAT[15:0] is tristated when RENB is high.
RDAT[15:0] is also tristated when either the null-
PHY address (0x1F) or an address not matching
the address space is latched from the RADR[4:0]
inputs when RENB is high.
RDAT[15:0] is updated on the rising edge of
RFCLK.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
19