PM7344 Datasheet, PDF (125/293 Pages) PMC-Sierra, Inc – SATURN QUAD T1/E1 MULTI-PHY USER NETWORK INTERFACE DEVICE

DATA SHEET
PMC-950449
ISSUE 6
PM7344 S/UNI-MPH
MULTI-PHY USER NETWORK INTERFACE
SYNC:
The SYNC bit enables the PLL to synchronize the phase delay between the
FIFO input and output data to the phase delay between reference clock input
and smooth output clock at the PLL. For example, if the PLL is operating so
that the smooth output clock lags the reference clock by 24 UI, then the
synchronization pulses that the PLL sends to the FIFO will force its output
data to lag its input data by 24 UI. If the SYNC bit is set to 1, the Clock
Divisors (Registers x19H and x1AH) must be set such that N1+1 and N2+1 is
a multiple of 48.
LIMIT:
The LIMIT bit enables the PLL to limit the jitter attenuation by enabling the
FIFO to increase or decrease the frequency of the smooth output clock
whenever the FIFO is within one unit interval (UI) of overflowing or
underflowing. This limiting of jitter ensures that no data is lost during high
phase shift conditions. When LIMIT is set to logic 1, the PLL jitter attenuation
is limited. When LIMIT is set to logic 0, the PLL is allowed to operate
normally.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 109