PM8310 Datasheet, PDF (1/2 Pages) PMC-Sierra, Inc – TEMUX 336 High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with Integrated SONET/SDH Framers

PM8310 TEMUX 336
High Density T1/E1 Framer, VT/TU Mapper & M13 Mux with
Integrated SONET/SDH Framers
Preliminary
Product Brief
PRODUCT OVERVIEW
The PM8310 TEMUX 336 is a high density T1/E1, DS3/E3 framer, VT/TU
mapper, and M13 multiplexer with integrated SONET/SDH framers for
OC-12/STM-4 and 4xOC-3/STM-1 applications. Feature integration and
scalability make the TEMUX 336 ideal for use in ATCA/AMC line cards,
voice and media gateways, routers, and multi-service and edge aggre-
gation switches.
The TEMUX 336 device’s unique Extended Serial SONET/SDH Interface
(ESSI) enables:
• A low pin-count interconnect to additional TEMUX 336 devices for
equipment protection applications
• Higher-rate SONET/SDH framers such as the PM5336 ARROW 2488
for channelized OC-48/STM-16 designs
• SONET/SDH cross-connects in transport applications
• Ethernet over SONET/SDH mappers such as the PM4390
ARROW M8xFE
Additionally, the device’s Scalable Bandwidth Interconnect (SBI) bus
enables a simple interconnect to PMC-Sierra Layer 2 solutions such as
the FREEDM (HDLC processor), S/UNI IMA (ATM inverse multiplexer)
and AAL1gator (ATM-based CES processor) families.
BENEFITS
• Complete SONET/SDH front end with T1/E1, DS3/E3
framers/mappers/ multiplexers on a single chip that meets
ATCA/AMC space and power constraints
• Integrated SBI bus simplifies interconnection to layer 2 processors
• Meets timing requirements for wireless backhaul, critical for CES-
based PWE3 applications, by enabling independent timing for all
336/252 T1/E1s across the SBI using the V4 byte
• Extended Serial SONET/SDH Interface (ESSI) can aggregate up to 4x
OC-3/STM-1 on a single 4-wire interface, enabling equipment
protection in ACTA/AMC systems
• Supports linear 1+1 protection on the same device or to a
companion TEMUX 336 device
• Enables a scalable architecture from T1/E1 up to OC-12/STM-4
• Supports T1/E1 mapping directly into SONET/SDH using VT1.5/TU-11
or VT2/TU-12 or multiplexed in DS3s using M13 or G.747
• Supports advanced test features including programmable pattern
generation and detection for up to 64 byte sequences
• Fully integrated, monolithic IC ensures reliability
PRODUCT HIGHLIGHTS
• 8 OC-3/STM-1 or 2 OC-12/STM-4 SONET/SDH framers
• 336 T1/252 E1 framers
• 12 M13 multiplexers, including support for G.747 multiplexing
• 12 DS3/E3 framers
• High order path processor for a SONET STS-12 or an SDH STM-4
• Tributary path processor for 336 VT1.5/TU-11s or 252 VT2/TU-12s
• Byte-synchronous and bit-asynchronous mapper for 336 VT1.5/TU-
11s or 252 VT2/TU-12s
• Tributary path processor for 12 TU-3s
• Mapper for 12 DS3s or 12 E3s (TU-3 and AU-3)
BLOCK DIAGRAM
OC-3/OC-12
OC-3
OC-3
OC-3
622M ESSI
622M ESSI
OC-3/OC-12
OC-3
OC-3
OC-3
SONET/SDH
Transmitter
(w+p)
Tx ESSI
(w+p)
Rx ESSI
(w+p)
SONET/SDH
Framer
(w+p)
to DS3/E3 LIU
STS-1
Switch
HO/LO
Pointer
Processor
SONET/
SDH
Mapper
to DS3/E3 LIU
DS3 M13
Tran Mux
T1/E1 Tran
DS3 M13
Frmr DMux
T1/E1 Frmr
Tx System
Interface
(SBI,
SBI-TR,
H-MVIP)
Rx System
Interface
(SBI,
SBI-TR,
H-MVIP)
SBI, SBI-TR or
32M H-MVIP
SBI, SBI-TR or
32M H-MVIP
PMC-2060576, Issue 1
© Copyright PMC-Sierra, Inc. 2006
All rights reserved. Proprietary and Confidential to PMC-Sierra, Inc. and for its customers’ internal use.