PL611S-15 Datasheet, PDF (3/6 Pages) PhaseLink Corporation – 1.8V-3.3V PicoPLLTM 32K Programmable Clock

P (Preliminary) L611s-15
1.8V-3.3V PicoPLL^TM 32K Programmable Clock
ELECTRICAL SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
PARAMETERS
SYMBOL
MIN.
MAX.
UNITS
Supply Voltage Range
VDD
-0.5
4.6
V
Input Voltage Range
V_I
-0.5
VDD+0.5
V
Output Voltage Range
V_O
-0.5
VDD+0.5
V
Data Retention @ 85°C
10
Year
Storage Temperature
T_S
-65
150
°C
Ambient Operating Temperature
-40
85
°C
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the device
and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other conditions above
the operational limits noted in this specification is not implied.
AC SPECIFICATIONS
PARAMETERS
CONDITIONS
Input Frequency (FIN)
Output Frequency
Output Frequency
Output Frequency
Settling Time
Reference Clock Input
@ Vdd=3.3V
@ Vdd=2.5V
@ Vdd=1.8V
At power-up (after VDD increases over 1.62V)
Input (FIN) Signal Amplitude Internally AC coupled
Output Rise Time
Output Fall Time
15pF Load, 10/90%VDD, High Drive, 3.3V
15pF Load, 90/10%VDD, High Drive, 3.3V
Duty Cycle
VDD/2
* Note: Jitter performance depends on the programming parameters.
MIN.
10KHz
2.5
2.5
2.5
0.9
45
TYP.
1
1
50
MAX. UNITS
200 MHz
200 MHz
166 MHz
133 MHz
2
ms
VDD Vpp
1.2
ns
1.2
ns
55
%
47745 Fremont Blvd., Fremont, California 94538 Tel [phone] Fax [phone] www.phaselink.com Rev 07/18/06 Page 3