PLL602-20 Datasheet, PDF (1/6 Pages) PhaseLink Corporation – 200MHz XO IC With Selectable 4X/8X Multiplier

PLL602-20
200MHz XO IC With Selectable 4X/8X Multiplier
FEATURES
PIN CONFIGURATION
• Integrated crystal oscillator circuitry (XO).
• Very low Jitter and Phase Noise (-110dBc @
10kHz offset)
• Selectable frequency multiplication (x4, x8).
• Accepts Fundamental Crystal input of 10MHz-30MHz
• Output Frequency: up to 200MHz CMOS
• Output enable (OE) pin with 60KΩ pull up
resistor
• Operating temperature range from 0°C to 70°C
• 2.5 or 3.3V supply voltage.
• Available in Green/RoHS compliant 8-pin SOIC
package
XIN/FIN 1
GND 2
SEL4X/8X 3
CLK 4
8 XOUT
7 OE
6 NC
5 VDD
DESCRIPTION
The PLL602-20 is a general purpose low jitter and
low phase noise (-110dBc @10kHz offset), high
performance CMOS XO IC. This flexible device can
be used as a XO with output frequencies ranging
from F_XIN x 4 to F_XIN x 8 with the use of a single
selector pin. This makes the PLL602-20 the ideal
high performance, low-cost solution for a wide range
of applications requiring up to 200MHz (including
77.76MHz, 125MHz and 155.52MHz).
PAD LAYOUT AND DIE ID
XIN 1
GND ²
GND 3
SEL4X/8X ⁴
CLK ₅
9 XOUT
8 OE
7 VDD
6 VDD
BLOCK DIAGRAM
DIE SPECIFICATION
SELx4x/8
Name
Value
XIn
XOut
XO
Selectable
PLL
CLK
Size
Reverse side
Pad Opening
31.5x55.1 mil
GND
80 micron x 80 micron
Die Thickness
10 mil
C
47745 Fremont Blvd., Fremont, California 94538 Tel [phone] Fax [phone] www.phaselink.com Rev 02/18/05 Page 1